Fujitsu PRIMERGY RX100 S6 Options Manual page 34

Installing an accessible 5.25-inch slimline drive
Figure 12: Connecting the cables
Ê Connect the power cable (1) to the accessible drive (see the cabling plans
in the Appendix).
Ê Connect the data cable (2) to the SATA connector on the accessible drive
(see the cabling plans in the Appendix).
Figure 13: Connecting the SATA cable to the system board
Ê Thread the SATA cable through the openings (1).
Ê Connect the SATA cable (2) to the system board (see the cabling plans in the
Appendix).
Ê Close the server, connect it to the power outlet, and switch it on as described
in the chapter "Completion" on page
34
63.
Options Guide
RX100 S6