Fujitsu PRIMERGY RX100 S6 Options Manual page 46

Installing an expansion card
Riser module 2
Riser module 2 offers slot 2 and slot 3.
Ê Open the server as described in the chapter "Preparation" on page 23.
Figure 26: Removing the riser module 2
Ê If necessary, remove the cables from the two cable clamps (1). Notice the
cable routing.
Ê Carefully pull out the riser module 2 upward (2).
Ê Please read the documentation supplied with the expansion card.
46 Options Guide
RX100 S6