CDA FW971 Installation, Use And Maintenance Manual page 24

Fitting the cabinet decor doors
Fit the upper decor door first by following the steps below.
1.Remove the door trims from the top of both appliance doors ('T' in
Fig. 14). With the upper door, take care not to disturb or damage the
magnet ('M' in Fig. 14) when removing the trim. Set the trims aside for
later and re-fit these once installation is complete.
2.Take the decor door guides (pictured in Fig. 15) out of their
positions. Turn them around and reinsert them into the grooves as
pictured in Fig. 16. The notches will act as gauges for the next step.
3. With the fridge door closed, and using the fitting guides, adjust the
guides to the required position with respect to the cabinet (Fig. 17).
4. Without moving the fitting guides, remove the upper fixing plate
from the door by removing the fixing plate securing screws (circled
in Fig. 18).
Fig. 14
24
T
M