NEC UX5000 User Manual page 16

0913401_rev2-01-low copy.qxd
Calling (Logging Into) Your Mailbox
Voice Mail lets callers leave recorded messages for you and lets you leave recorded messages for co-workers.
Messages get stored in each person's mailbox. To listen to your messages or use other voice mail features, you
call your mailbox and access the Main Menu. When you have new messages, your Voice Mail key flashes and
you see the VMsg Soft Key
The Automated Attendant can answer your company's calls with a recorded message and give dialing instruc-
tions for callers to follow.
To log into your mailbox from your own phone:
1. Do one of the following:
– Press your Voice Mail Function key.
– Push VMsg.
To log into your mailbox from a co-worker's phone:
1. Press
CALL1
2. Dial your own extension number.
– If you share a Group Mailbox with co-workers, pressing the Voice Mail key on your phone or
their phone logs you into the same shared mailbox.
From outside, to log onto your mailbox after calling your company's Automated Attendant:
1. Dial (for remote logon).
#
2. Dial your own extension number.
From outside, to log onto your mailbox if you have a direct line to your phone:
(This requires custom programming and your phone must be forwarded to voice mail.)
1. When voice mail picks up, wait for your greeting to start.
2. Dial to stop the greeting.
#
and your own extension number.
3. Dial
#
From outside, to leave a message for a co-worker after calling your company's Automated Attendant:
1. Dial (for quick message).
*
2. Dial your co-worker's extension number.
16
3/14/08 2:35 PM Page 16
on your display.
and dial the voice mail master number (normally 700).