NEC UX5000 User Manual page 10

0913401_rev2-01-low copy.qxd
Dialing By Name (Directory Dialing)
To dial a co-worker or outside call by selecting from a group of names:
Dir Soft
1. Push
Soft Key
2. Push
– ABBc = Common or Group Abbreviated Dialing
EXT.
– = Co-worker's extension numbers
STA
– = Personal Abbreviated Dialing
– TELBK
3. Dial letter/number for the party you want to call (e.g. dial 2 for A, B, C or 2).
Down Arrow Soft Key
4. Push the
5. Push the Down Arrow Soft Key
6. or lift handset to place call or push the
CALL1
Change Your Ring Tones
To change your extension's incoming ring tones:
1. +
CALL1 820.
2. Dial to set the Intercom ring or Dial
1
– Transfered calls use the intercom ring tone you select.
3. Dial the code for the ring pattern you want (Tones
– You'll hear the new ring tone as you dial each digit.
4. SPK to hang up.
To listen to the incoming ring choices:
1. +
CALL1 811.
2. Dial to listen to the Intercom ring or Dial
1
3. Dial code for ring pattern you want (tones
– For outside line ring (1-3), enter the tone (1-4) to which you want to listen.
4. to hang up.
SPK
10
3/14/08 2:35 PM Page 10
Key.
for Directory Dialing type:
= Central Telephone Book
to jump to that section.
or press
to set the outside line ring.
2
1-8
L or M
to scroll through the list.
VOL
Dial Soft Key.
).
1-8
to listen to the outside line ring.
2
).