Docomo P-06b Instruction Manual
  1. Manuals
  2. Brands
  3. Docomo Manuals
  4. Cell Phone
  5. P-06b
  6. Instruction manual

Docomo P-06b Instruction Manual

'10.7
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
P-06B
'10.7
INSTRUCTION MANUAL

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the P-06b and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Docomo P-06b

Summary of Contents for Docomo P-06b

  • Page 1 P-06B ’10.7 INSTRUCTION MANUAL...
  • Page 2 For Using This Manual download detailed information about all the functions ⿠Note that “P-06B” is referred to as “FOMA terminal” in this manual. and their operating procedures. (In Japanese only) ⿠Most operating procedures and displays in this manual are described with the default settings of the “Black”...

  • Page 3: Table Of Contents

    FOMA Terminal ····································2 Precautions ··········································7 Introduction What You can Do with P-06B ···············3 Handling Precautions ························15 Contents Part Names and Functions ··················4 Waterproof Performance ···················18 P.1 ～ ▶ Styles ···················································6 Before Using ·····························23 Character Entry·························36 Lock/Security ····························43 Basic Charging, Power ON/OFF, etc.

  • Page 4: Foma Terminal

    SSL/TLS. In the event that the user shall sustain damage or loss due to the use of SSL/TLS, neither DOCOMO nor the certifi ers shall be responsible for any such damage or loss.

  • Page 5: What You Can Do With

    What You can Do with P-06B 使いかたガイ ド (Guide) Touch Panel ▶ Camera ▶ P.32, P.86 P.69 In Viewer Style, you can start You can check “使いかたガイド (Guide)” Using the high-image-quality onscreen for how to operate a function using your favorite functions on...

  • Page 6: Part Names And Functions

    Part Names and Functions ❶ Light sensor ❼+ �+ d Start key h Power/End key ❶ ❾ For sensing brightness (Do not For starting to talk For turning on/off the power or ❷ cover it with your hands or do ending a call ❽■...
  • Page 7 Strap hole 1Seg antenna For receiving 1Seg broadcasting Camera For shooting portraits and/or landscapes  f mark An IC card is installed. Use it for Osaifu- ❾ Keitai or iC communications. Back cover Remove this when attaching/removing the battery pack, UIM, and microSD card. Engage your fingertip Change the direction The inner cover is found inside the back...

  • Page 8: Styles

    Styles Notes when rotating the display panel ⿠Do not knock the display The P-06B comes with two styles. panel against the button ■ Normal Style area, desk or other surface. ⿠Do not rotate the display This style supports button operations.

  • Page 9: Precautions

    Precautions ALWAYS FOLLOW THESE DIRECTIONS ■ Before using the FOMA terminal, read these safety precautions carefully so that you can use it correctly. Denotes wet hands not to touch with. After reading the precautions, keep them in a safe place. Not wet ■...

  • Page 10: Danger

    General precautions for FOMA the batteries and adapters other places where fl ammable terminal, batteries, adapters, specifi ed by NTT DOCOMO, INC. gases are in the atmosphere, be desktop holder, touch pen and Fire, burns, injury or electric shock may absolutely sure to turn off the result.

  • Page 11: Precautions For Foma Terminal

    Do not store in humid or dusty Do not turn on the photo light Precautions for FOMA terminal places, or in high temperature to drivers of cars, and others. environments. It disturbs driving, and accidents may Warning Don’t Don’t result. Fire, burns or electric shock may result.
  • Page 12 For those with weak heart If the display part or camera If the FOMA terminal’s display conditions, the vibrator and lens is broken, be careful about has been damaged and its ring volume must be adjusted broken glasses or the exposed liquid crystal has leaked out, Don’t carefully.

  • Page 13: Precautions For Batteries

    ■Check the description on the label of leak. such as a docomo Shop or dispose of it the battery pack for the type of battery. If the battery fluid gets into your in accordance with local waste disposal eyes, do not rub them.

  • Page 14: Precautions For Adapters And Desktop Holder

    Do not place heavy objects on If a fuse of the DC adapter Precautions for adapters and the adapter cord. has blown, replace it with a desktop holder Fire, burns or electric shock may result. specified fuse. Don’t Fire, burns or electric shock may result. Warning For the specified fuse, refer to each When plugging the AC adapter...

  • Page 15: Precautions For Touch Pen

    Before cleaning, pull the Turn off the FOMA terminal in Notes on using near electronic power plug out of the outlet or trains during the rush hour or medical equipment cigarette lighter socket. other crowded areas as there Pull the ■The description below meets Fire, burns or electric shock may result.
  • Page 16 ■List of materials used Where it is used Material/Finishing Battery pack Resin area Polycarbonate Where it is used Material/Finishing Label PET resin Outer casing Display surface, Polycarbonate + glass fiber/ Terminal area Glass epoxy substrate/ Display side surface tin vapor deposition + UV coating nickel plating + gold plating Display back Polyamide + glass fiber/UV coating...

  • Page 17: Handling Precautions

    General notes conditioner outlets. notes of the information stored in the ■The P-06B is provided with the waterproof FOMA terminal and keep such notes in a Condensation may form due to rapid changes in temperature, and this may corrode internal parts safe place.
  • Page 18 ■When using the power outlet having the any unneeded UIMs to a handling counter Though it varies depending on the usage state, such as a docomo Shop. disengaging prevention mechanism, you are advised to replace the battery if its usable observe the instructions given in that ■Do not damage, carelessly touch, or short-...
  • Page 19 Dial-up Communication, Object Push, and mobile phone in your hand while driving. If you 3. For further details, contact “docomo Serial Port. With Audio, you might be able answer a call out of necessity, tell the caller with Information Center”...

  • Page 20: Waterproof Performance

    On Leisure ※1 IPX5 means that the P-06B maintain its performance as a phone ⿠Do not soak or drop your FOMA terminal into a pool or even after a water jet fl ow has been sprayed over the FOMA terminal the sea nor operate it in water.
  • Page 21 Take your FOMA terminal to a repair counter specified by Opening the cover forcibly may Projection DOCOMO. injure your nails or fingers. ■Opening/Closing the Connector Terminal Cover ■Attaching the back cover ① Fit the claws at the left, right and bottom sides of the inner cover ■Opening the connector terminal cover...
  • Page 22 If the FOMA terminal gets wet, keep the back cover attached and the counter specified by DOCOMO. connector terminal cover closed, drain off the water (see page 21), and ■About microphone, earpiece, and speakers...
  • Page 23 ③ Lightly push the FOMA terminal against a clean dry cloth, Draining Water and wipe moisture off the clearance gap of the microphone, earpiece, speaker, keys, or hinges. ⿠If you operate the FOMA terminal with water drops left adhered ⿠Do not directly wipe moisture out of joint gap using a cotton to, a volume level from the speakers might be decreased or sound swab, etc.
  • Page 24 When Charging Battery Accessories and optional items are not waterproofed. Check the following before and after charging: ⿠Never charge the battery with the FOMA terminal left wet. If the FOMA terminal gets wet, drain and wipe off moisture with a clean dry cloth and then charge.

  • Page 25: Before Using

    ⿠You cannot use the UIM (blue) on your FOMA When you remove the UIM terminal. If you have that blue one, have it replaced at Pull it out slowly while sliding. a docomo Shop. Attach the battery pack. Attach the battery pack. Arrow mark...
  • Page 26 When charging is completed, hold the When charging is completed, hold the Charging desktop holder with fi ngers and lift up desktop holder with fi ngers and lift up ■Charging Using the Desktop Holder the head of FOMA terminal to remove. Call/Charging indicator AC Adapter’s plug ■...
  • Page 27 Turning Power ON Confi guring Initial Setting h for at The Initial Setting display appears when you turn on Press and hold the power for the fi rst time. least one second. Set the date and time. Set the date and time. After the Wake-up display and notes of waterproof are displayed, You can set the date and time.

  • Page 28: Checking Your Own Phone Number

    Checking Your Own Phone Number Switching to English Display m from the Stand-by m from the Stand-by display 本体設定 (Setting) ▶ ▶ display display Profi le 文字表示／入力 (Text display/input) ⿠From the display on the right, ▶ press ) to store your ▶...

  • Page 29: Screen Explanation

    Screen Explanation Viewing Display/Icon Battery level (estimate) Status icon ·········· Vibrator is set. Full ·········· Ring Volume is set to ⿠When is shown, charge the battery. “Silent”. ⿠Depending on the usage ··········· In Manner Mode state, the battery level indication ····...
  • Page 30 Using Motion Control Notifi cation icon ······· New i-mode mail or You can set whether to use Motion Control that makes it possible for the display direction of the screen to be switched automatically simply by tilting the FOMA ·······Missed call terminal.
  • Page 31 ■ Command navigation key Navigation Displays and Key Operations Key operations you can do while you are operating ⿠Moves the cursor or ⿠Moves the cursor to the a function are shown at the bottom of the display. highlighted display up. (Hold right.

  • Page 32: Simple Menu

    ■ Simple Menu Menu Operation ■ Simple Menu is a menu focusing on only basic Main Menu functions for easy operation. By setting “Simple menu” m from the Stand-by display to show Main Menu. Press using the Kisekae tool, you can show the Simple Menu m from the Stand-by display.
  • Page 33 Submenu Functions Start to Work by Simple Operation When “ ” is displayed at the lower left of the display, Depending on the function, you can start it either by you can use functions such as Store, Edit, and Delete by selecting a menu item or by key operation from the pressing Stand-by display.
  • Page 34 ■ Touch Pen How to Use Touch Panel In Viewer Style, you can perform operations by When using the touch pen, touch the touch panel touching the touch panel (display) using the touch pen. (display) lightly with the tip of the pen. ⿠In Normal Style, you cannot perform any operations by ⿠When attaching the touch pen to the FOMA terminal touching the touch panel.

  • Page 35: Control Key

    ■Basic Touch Panel Operations Operation Main Operation Quick slide For scrolling the displays Use the touch pen to perform the touch panel operations. ⿠On some displays, scrolling will This operation involves sliding the touch pen quickly in the up, continue for a moment or two after Operation Main Operation down, left or right direction on...
  • Page 36 ■ ■ Setting Display Lock Adjusting the Touch Panel You can set Display Lock to ensure that no further Take the steps below to adjust the Touch Panel operations using the touch panel will be performed. operations (where the touched positions are In this way, you can prevent operations from being detected).
  • Page 37 ■ Normal Menu Displaying Touch Menu in Viewer Style When “ ” is touched with Viewer Style selected, the Normal Menu is ■ Home Menu displayed. You can operate any of the functions When “ ” is touched with Viewer by touching the corresponding icon Style selected, the Home Menu is on this menu.

  • Page 38: Character Entry

    Character Entry You can enter characters on the Registration display for Phonebook entries or the Composition display for mail messages, etc. Select a input mode. Select a input mode. Convert/fi x characters. Press Press ) to select one of o to specify the area 1.
  • Page 39 <Example> Entering “タダの菓子” in a note. m from the Stand-by o to move the ▶ ▶ display display Tool Note cursor onto “の”. cursor onto “ ▶ Select <Not recorded>. o to move the Enter hiragana characters in Enter hiragana characters in Kanji/Hiragana input mode.

  • Page 40: Sound/Screen Setting

    Sound/Screen Setting Adjusting Ring Volume <Example> Adjusting the ring volume for incoming Changing Ring Tone voice calls <Example> Changing the ring tone for incoming voice ▶ m from the Stand-by display Setting calls ▶ ▶ Sound/Vib./Manner Ring volume ▶ m from the Stand-by display Setting Select “Phone”.
  • Page 41 Using Manner Mode Setting Keypad Sound OFF Just by pressing a key, you can make a tone from the You can silence a Keypad sound for when you press a FOMA terminal such as a ring tone, keypad sound, key. and alarm sound silence.
  • Page 42 ■ ■ Changing the Display Brightness Making Display Hard to Be Seen by the People Around You can adjust the brightness of the display. You can also set that the display brightness will be automatically You can set “View blind” to make it harder for the adjusted in line with the amount of light around you.
  • Page 43 ■ Changing Character Size Using Kisekae Tool <Example> Changing the size of all the characters to You can set the ring tone, Stand-by display, menu “X-large”. icons and others at a time. 7 for at least one Press and hold Press and hold m from the Stand-by display second from the Stand-by display.

  • Page 44: Checking Missed Calls And New Mail

    Changing Illumination Checking Missed Calls and New Mail by Tone and Call/Charging Indicator <Example> Changing Illumination in Call for voice calls. With the FOMA terminal closed, you can check for ▶ m from the Stand-by display Setting missed calls, new mail and others. ▶...

  • Page 45: Lock/Security

    (your copy) that is handed over to or color theme are shown to you at a docomo Shop at the time of contract. If your contract has been made at a shop other than a docomo indicate this mode as the display.
  • Page 46 This is a four-digit number required for your identifi cation When the PIN1 Code/PIN2 Code Entry display when you place an order for at a docomo Shop, docomo appears, enter your four- to eight-digit PIN1 code/PIN2 Information Center, or “お客様サポート (User support)”...

  • Page 47: Various Lock Functions

    You can set your FOMA terminal not in succession, the UIM is locked. In that case contact to be used by a third party. one of docomo Shops. You can do no operations other than answering calls and turning on/off ■...

  • Page 48: Restricting Incoming Calls

    ▶ ▶ Lock/Security Call rejection set. ⿠You can set/release also from the My docomo site via your personal computer or other devices. (In Japanese only) Enter your Terminal Security Code Enter your Terminal Security Code Self Mode You can disable all phone calls and ▶...
  • Page 49 Business Online From personal computers ▶ ▶ Other setting Reset settings http://www.docomo.biz/ (in Japanese only) ※You may not be able to access due to system Enter your Terminal Security Code Enter your Terminal Security Code maintenance, etc. ▶ Select “YES”.

  • Page 50: Call Telephone

    ■ Making a Call from Phonebooks Call Telephone <Example> Search a Phonebook entry by the name Making a Call/Videophone Call stored in Phonebook ■Enter a Phone Number to Make a Call o from the Stand-by display. Press Press From the Stand-by display, enter a From the Stand-by display, enter a phone number starting with a city code.

  • Page 51: Phone Number

    (Received call from Japan. Press Press ⿠Contact “docomo Information Center” on the back page Calls) from the Stand-by display. Calls) from the Stand-by display. of this manual for inquiries about WORLD CALL. ⿠When using international carriers other than DOCOMO, Select a call record.

  • Page 52: Receiving A Call/Videophone Call

    Receiving a Call/Videophone Call When You cannot Answer a Call ■ Activate Record Message A call comes in. A call comes in. By activating Record Message, you can record a caller’s The ring tone sounds and the Call/Charging indicator The ring tone sounds and the Call/Charging indicator voice/video message when you cannot answer the call.

  • Page 53: Press And Hold

    ■ ■ Using Public Mode (Drive Mode) Using Public Mode (Power Off) Once you activate Public mode (Drive mode), the Once you activate Public mode (Power off), the guidance is played back telling that you cannot guidance is played back for an incoming call while the answer the call as you are currently driving or in a power is off, telling that you cannot answer the call as place where you should refrain from speaking on the...
  • Page 54 ⿠The network services are not available when you are out of the service area or out of reach of radio waves. ⿠For details, refer to “Mobile Phone User’s Guide [Network Services]”. ⿠For subscriptions and inquiries, contact “docomo Information Center” on the back page of this manual. Service...

  • Page 55: Using Call Forwarding Service

    ■ ■ Using Voice Mail Service Using Call Waiting Service m from the Stand-by display m from the Stand-by display ▶ ▶ ▶ ▶ TEL function Voice mail service TEL function Other network serv. ▶ Call waiting Activate the service ▶...

  • Page 56: Services Available For Foma Terminal

    Services Available for FOMA Terminal Available services Phone number Available services Phone number Directory assistance service Emergency calls to police (No prefix) 110 (Charges apply: guidance fee + call fee) (No prefix) 104 Emergency calls to fire station and (No prefix) 119 ※Listed phone numbers only are supported.

  • Page 57: Available Services Overseas

    Japan, in a service ※3 ○ ー ○ i-mode ○ ー ○ area of the overseas carrier partnered with DOCOMO. It i-mode mail ※3※4 ○ ー ○ i-Channel enables you to continue using the voice call, SMS and ※5 ○...

  • Page 58: Mail

    ■Make a Call to Outside the Country Mail You Stay at Sending i-mode Mail 0 (for at least one second) from the ▶ Stand-by display Stand-by display Enter numbers in Once you subscribe to i-mode, you can exchange e-mail order of country code→area code (city messages over the Internet.
  • Page 59 Sending Deco-mail Sending Decome-Anime You can change the color or size of characters or You can create impressive messages by inserting text background color, or insert images or Deco-mail or images into a Flash fi le. pictograms. 1 1 1 1 l from the Stand-by display l from the Stand-by display ▶...
  • Page 60 ■ Replying to i-mode Mail Displaying Received i-mode Mail Press Press ) while an i-mode mail ▶ l from the Stand-by display Inbox is displayed. is displayed. Enter each item. Enter each item. Select a folder. Select a folder. Press Press Select an i-mode mail message.
  • Page 61 ■ ■ Checking New i-mode Mail Sorting i-mode Mail You can check the i-mode Center for a new mail You can use “Auto-sort” to sort received/sent i-mode message or Message R/F. mail messages into a folder such as “Business” or “Friend”...

  • Page 62: Using Sms

    Early Warning “ Area Mail” Using SMS ■Receiving Area Mail You can send text messages to the mobile phone number at the other end. You can receive information such as about earthquake ■ Sending SMS alerts that are issued from the Japan Meteorological Agency as an Area Mail message.

  • Page 63: Phonebook

    ■ Displaying Received SMS Message Phonebook ▶ l from the Stand-by display Inbox Storing Phonebook Entries ■Storing New Phone Numbers/Mail Select a folder. Select a folder. Addresses You can store Phonebook entries in the FOMA terminal (Phone) or on the UIM. Select an SMS message.

  • Page 64: Editing Phonebook Entries

    ■Storing Phonebook Entries from Editing Phonebook Entries Redial/Received Call Records o from the Stand-by display o (Redial) or o (Received Press Press ▶ Search and select a Phonebook entry. Calls) from the Stand-by display. Calls) from the Stand-by display. ▶ Edit phonebook Highlight a call record and press Highlight a call record and press...

  • Page 65: I-Mode/Full Browser

    i-mode/Full Browser ■Before using i-mode ⿠Content of sites or websites is in general protected Displaying i-mode Sites by copyrights law. You can use data such as text and images for your entertainment, which you download i-mode is a service that enables you, by using the to your i-mode phone, but you cannot use them, part display of the FOMA terminal supporting i-mode or whole of it as is, or modify them for the purpose of...
  • Page 66 Displaying Websites Designed for Switching Browsers You can switch to Full Browser to show the Internet websites incorrectly displayed by i-mode. You can browse Internet websites designed for PCs ⿠The billing system differs between i-mode and Full using the Full Browser function. Browser.

  • Page 67: Viewing And Operating Sites

    Viewing and Operating Sites Saving Site Content Operations on site viewing display If you save the page once you visited as a screen memo, you can easily refer to it without connecting to i-mode. Scroll display/Move highlighted/ Move the pointer: * ) while the site is displayed ▶...

  • Page 68: I-Channel

    Further, two types of channels, “Basic channel” provided ⿠Note that we do not take any responsibility for a by DOCOMO and “Okonomi (Optional) channel” provided loss such as pure economic loss resulting from the by IPs (Information Providers) are available. You are not...

  • Page 69: Position Location

    ■ ■ Checking Your Location Reading Map You can locate your current location by GPS. You can You can start GPS compatible i-αppli, and you can also display a map using this location information read a map of current or specifi ed location. and send this information as an i-mode mail.

  • Page 70: Using Auto-Gps

    ⿠Set the service to “ON” to automatically and periodically send GPS service providers or the DOCOMO website for your location information from the FOMA terminal to DOCOMO. how you can use services. It might happen that you will ⿠To use i-concier or respective services, you need to be charged a fee for using them.

  • Page 71: Camera

    Camera Viewing and Operating Finder Display Menu Image stabilizer You can check the settings. Select photo mode : Auto : intelligent Auto Continuous setting Image size setting : 1 image : 2M Wide (1080×1920) Number of recordable image Image quality setting Shows the number of remaining recordable : Super fi...
  • Page 72 Shooting Still Images/Moving Pictures Viewing Still Images/Moving Pictures after Shooting ■Shooting Still Images ( Digicam Mode) You can shoot still images within the sizes from Square The still image you shot is saved to “My picture” (small) (480 x 480) to 13M (3120 x 4160). In the Digicam in Data Box.
  • Page 73 ■ Shooting Still Images Using Auto Shooting Still Images Using Shutter Various Methods The camera automatically shoots identifying the ■ Shooting Still Images Using Omakase number of faces and the distance between faces by Choice face recognition. You can shoot 6 or 8 still images one after the other. The <Example>...

  • Page 74: 1Seg

    1Seg Using 1Seg ■Using 1Seg 1Seg is a service provided by television entrepreneurs (broadcasting stations). You are not charged a communication fee for receiving video and audio. For about fee charged by NHK, contact NHK. ※You are charged a packet communication fee for browsing “Data broadcasting site” and “i-mode site”. You might be charged an information fee for using some sites (i-mode pay sites).

  • Page 75: Setting Channels

    Setting Channels Watching 1Seg When you activate 1Seg for the fi rst time or change c for Press and hold the area you are in, you need to operate “Channel at least one second from setting”. Select “Auto channel setting” to enable you the Stand-by display.
  • Page 76 Viewing and Operating Viewer Display Displayed while you are watching a 1Seg program Video being recorded Program Information (outline) Switch Visual Image/Caption Video Caption Data Displayed while receiving caption Broadcasting information Operation Mode Sound Volume : Video Mode Airwave Reception Level (estimate) 　...
  • Page 77 Setting Timer for Watching or Playing Recorded Video Recording 1Seg Programs m from the Stand-by display ▶ ▶ Set the date and time, a channel, and program name, and Data box 1Seg enter them to the TV Timer List or Timer Recording List. ▶...

  • Page 78: Music

    Music Setting Programs m from the Stand-by display Music&Video Channel ▶ CAMERA/TV/MUSIC ▶ ▶ Music&Video Channel Program set. Music&Video Channel is a service which automatically delivers up to about one-hour programs at night just Follow the instructions on the display Follow the instructions on the display by selecting your favorite music programs in advance.

  • Page 79: Playing Music Files

    ® Downloading Chaku-uta Full Playing Music Files Music Files ® MUSIC Player enables you to play Chaku-uta Full music fi les you have downloaded from sites, or to ® You can download Chaku-uta Full music fi les from play Windows Media Audio (WMA) fi les you saved on sites.

  • Page 80: I-Αppli/I-Widget

    i- α ppli/ i-Widget Starting i-αppli i for at least one Press and hold Press and hold second from the Stand-by display. second from the Stand-by display. “i-αppli” is a software program for i-mode mobile phones. By downloading various software programs from the i-mode site, you can use your FOMA terminal more Select a software Select a software...
  • Page 81 Downloading i-αppli from Sites ⿠You can delete the pre-installed i-αppli programs. You can re-download deleted programs from the Select a software program from Select a software program from “P-SQUARE” site. downloadable site. downloadable site. You can download not only i-αppli programs but also the pre-installed Select “OK”...

  • Page 82: I-Motion/Movie

    i-motion/ Movie Downloading i-motion/Movie Select an i-motion/movie fi le from an Select an i-motion/movie fi le from an i-motion is a fi le consisting from video, audio, and i-motion/movie downloadable site. i-motion/movie downloadable site. music which you can download to your FOMA terminal from i-motion sites that support i-motion.

  • Page 83: Osaifu-Keitai

    Osaifu-Keitai Osaifu-Keitai/ ToruCa Osaifu-Keitai is equipped with the IC card so that you can make payments, use coupons, enjoy stamp rallies and so on by placing the FOMA terminal over the scanning device in the stores or other locations. Furthermore, by placing the FOMA terminal over a scanning device, you can access sites and web pages, obtain the latest coupons by communication, and check the deposits of electronic money and the status of its use.

  • Page 84: I-Concier

    Phonebook. It also allows you to share the schedules or images held by the DOCOMO’s Data Storage Center with friends, family members or other groups. It also enables you to easily Select a message.

  • Page 85: Convenient Tools

    Convenient Tools Using Alarm ▶ m from the Stand-by display Tool Using Schedule ▶ Alarm m from the Stand-by ▶ ▶ display display Tool Schedule Highlight an alarm and press Highlight an alarm and press Select a date to show a schedule event of the selected date.
  • Page 86 QR code is one of the 2-dimensional codes that denotes data in the vertical Select the URL Select the URL and horizontal directions. ▶ Select “i-mode Browser”. ⿠“株式会社NTTドコモ (NTT DOCOMO, INC.)” is displayed when you scan the QR code with the FOMA terminal.
  • Page 87 ■Connect the Bluetooth Device Bluetooth Function ▶ m from the Stand-by display Tool You can connect your FOMA terminal to a Bluetooth ▶ ▶ Bluetooth Device list device such as Wireless Earphone Set 02 (option), and can talk on the phone or play music fi les. ■Register a Bluetooth Device to the Select a Bluetooth device Select a Bluetooth device...

  • Page 88: Using Pedometer

    Using Pedometer Creating Handwriting Photo/Memo As you walk with your FOMA terminal in hand or On the touch panel, you can draw pictures or write in your pocket, your pace is measured, and then characters by hand onto the images or you can add depending on the measured results, your distance, decoration.

  • Page 89: Data Management

    If you do not have a microSD card, you need to purchase ⿠Push it until it clicks. ⿠P-06B supports a commercial microSD card of up to 2 Gbytes and microSDHC card of up to 16 Gbytes (As of June 2010).
  • Page 90 When you use the microSD card for the fi rst time, you need to format (initialize) it. ⿠Be sure to use P-06B for formatting. The microSD card formatted using other devices such as personal : A microSD card is inserted.
  • Page 91 ■ ■Displaying Data Stored on the microSD Copying Data to the microSD Card Card <Example> Copying a still image <Example> Displaying still image m from the Stand-by display m from the Stand-by display ▶ ▶ Data box My picture ▶ ▶...

  • Page 92: Infrared Communication

    ■ Back up Data to the microSD Card Sending/Receiving Data by Infrared Communication/ iC Communication You can back up Phonebook entries, schedule events, ToDo lists, messages, notes, and bookmarks, You can send or receive data such as Phonebook and the settings on and information about your entries to or from a device supporting the infrared FOMA terminal collectively onto the microSD card.
  • Page 93 ■Sending Data Connecting to Personal Computer ⿠For infrared communications, set the receiving end terminal You can connect the FOMA terminal to a personal fi rst, and then start sending data within 30 seconds. computer to exchange WMA fi les, images or other fi les stored on microSD card.

  • Page 94: Support

    …When you use the desktop holder, make sure the connector DOCOMO. terminal of the FOMA terminal is not stained. If it is stained, wipe the terminal part with a dry cotton swab, etc.
  • Page 95 The usable time of the battery is short. Cannot talk. …Make sure not to leave the FOMA terminal out-of-service-area for (“ ” does not disappear even if you move to another place. You cannot make or receive a call, though the radio wave a long time.
  • Page 96 DOCOMO reject to is charged even within the warranty period. repair the malfunction.
  • Page 97 “Repairs” counter Portions: speaker, earpiece listed on the back page of this manual. ⿠The P-06B comes with the waterproof performance, however, The “Repairs” counter is available in Japanese only. if the inside of the FOMA terminal gets wet or becomes moist, ⿠To connect to “ｉモード故障診断サイト...

  • Page 98: Updating Software

    ⿠When updating software programs, the proprietary information about your FOMA terminal (model name or serial number, etc.) is automatically sent to the server (DOCOMO-managed server for Software Update). We at DOCOMO never use the sent information for purposes other than to update software programs.
  • Page 99 ■ ■Start Software Update from Menu Start Software Update from Icon m from the Stand-by display Select “Update notifi cation icon” on the Select “Update notifi cation icon” on the Stand-by display. Stand-by display. ▶ ▶ Setting Other setting ▶ Software Update Enter your Terminal Enter your Terminal...
  • Page 100 FOMA terminal, or when no virus pattern data supporting them is found, this function is disabled to prevent troubles from occurring. ⿠The virus pattern data installed on the FOMA terminal differs in content by every model. Note that we at DOCOMO might stop to distribute the virus pattern data for models on market for last three years since their release.

  • Page 101: Introduction Of Options And Related Devices

    Some products may not be dealt in depending on the area. For details, consult a handling counter such as a docomo Shop. For details on options, refer to the user’s manuals of respective options and related devices.

  • Page 102: Appendix

    Appendix i Menu/Search Bookmark Screen Memo Function List Browser history Execute “Resetting the Function Settings” on page Enter URL Enter URL 47 for the items indicated by , to return to the URL enter history respective defaults. i-Channel list i-Channel Ticker display setting Inbox Reset i-Channel...
  • Page 103 Software list (phone) Digicam mode Software list Photo mode i αppli (microSD) i αppli data Camera Movie mode i αppli call logs View photos End stand-by info View movies End Widget appli info Activate 1Seg i αppli run info Security error history Program guide Auto start info TV timer list...
  • Page 104 Scan code Common phrases Bar code reader Phrases/Store word Saved data Store word Calculator Download dictionary Alarm Contact DOCOMO Receive Search phonebook Receive Ir data Receive all Add to phonebook Schedule Phonebook UIM operation Note Phonebook set./Check ToDo Forwarding image Pedometer Play/Delete msg.
  • Page 105 Visual preference Call forwarding Select image Call waiting Auto redial as voice English guidance Videophone setting Ntfy switch-mode Remote access Other network serv. Reject videophone Multi Number Hands-free switch Dual network V.phone while packet Additional service Call duration/charge OFFICEED Notify cost limit Kisekae Tool setting Call duration/charge Reset total...
  • Page 106 Ring volume USB mode Select ring tone Bluetooth External connection Other sound setting Headset microphone Sound/Vib./Manner Vibrator setting Femtocell Manner mode setting Work with style Stereo&3D sound Motion control setting Backlight Touch panel adjustment Backlight/Illum. Illumination setting Side key guard Font Alarm setting Other setting...
  • Page 107 i-concier imadoco kantan search imadoco search imadoco search Profile i-area IC card content GPS αppli list DCMX Position location Position/Notify ToruCa Location notification IC card lock Location history IC card lock setting IC lock (power-off) Map setting ToruCa settings GPS button setting Setting Receive ToruCa Location request set.

  • Page 108: Main Specifications

    Camera Number of Approx. 13,200,000 pixels effective pixels ■Handset Number of recording Approx. 13,000,000 pixels pixels (maximum) Model P-06B Recording Number of Approx. 2,400 max. (default) Dimensions (when closed) Height: Approx. 114 mm recordable still Width: Approx. 51 mm ※1 images Depth: Approx.
  • Page 109 Schedule 2,500 File format (Extension) MP4, ASF (3gp, asf) ※1※2 Mail Received mail 2,500 max. ※1※3 Recordable time to P-06B Approx. 497 seconds max. ※2 Sent mail 1,000 max. ※4 Recordable time to the microSD Approx. 180 minutes max. ※2 Still image 3,500 max.

  • Page 110: Sar Certification Information

    ■SAR Certification Information TELEC: http://www.telec.or.jp/ENG/Index_e.htm NTT DOCOMO: http://www.nttdocomo.co.jp/english/product/sar/ This model phone P-06B meets the MIC’s* technical regulation for Panasonic Mobile Communications Co., Ltd.: http://panasonic.jp/mobile/ exposure to radio waves. (In Japanese only) The technical regulation established permitted levels of radio...

  • Page 111: Declaration Of Conformity

    Conformity can be found on http://panasonic.net/pmc/support/index.html. permitted levels of RF energy for the general population. The guidelines are based ※The European RTTE approval of this product is limited to the use of the P-06B on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies.

  • Page 112: Important Safety Information

    ■Important Safety Information Export Administration Regulations AIRCRAFT This product and its accessories might be covered by the Japan Switch off your wireless device when boarding an aircraft or whenever you are Export Administration Regulations (“Foreign Exchange and Foreign instructed to do so by airline staff. If your device offers a ‘flight mode’ or similar feature consult airline staff as to whether it can be used on board.

  • Page 113: Intellectual Property Right

    “WORLD CALL”, “DCMX”, “i-area”, “WORLD WING”, “OFFICEED”, “2in1”, “docomo STYLE series”, and the logos of “FOMA”, “i-mode”, “i-αppli”, and “Music&Video Channel” are trademarks or registered trademarks of NTT DOCOMO, INC. ⿠This product contains NetFront Browser, NetFront Document Viewer and NetFront Sync Client of ACCESS CO., LTD.
  • Page 114 Bluetooth SIG, Inc. and any use license, also download revocation lists onto your device on behalf of Secure Content of such marks by NTT DOCOMO, INC. is under license. Other trademarks and trade Owners.

  • Page 115: Index

    Index Call waiting service ..... 53 Camera ........5, 69 AC adapter ........24 Early warning “Area Mail” ... 60 Channel setting ......73 After-sales services ..... 94 Earphone ........4 Character entry ......36 Alarm ..........83 Earpiece .......... 4 Line feed ........
  • Page 116 Kisekae tool ......... 41 Network security code ....44 Network services ......52 i-αppli ..........78 Normal menu ........ 35 IC card lock ........45 Light sensor ........4 Normal style ........6 iC communication ....... 90 Notification icon ......28 i-Channel ........
  • Page 117 PIN1 code ........44 Schedule ........83 ToruCa .......... 81 PIN1 code entry set ..... 45 Screen memo ....... 65 Touch menu........35 PIN2 code ........44 Security codes ......43 Touch panel ........32 Playing moving picture ..70, 80 Security scan function Touch panel adjustment .....
  • Page 118 My docomo (http://www.mydocomo.com/) ⿠“お客様サポート (User support)” and My docomo are available in Japanese only. ⿠If you do not have or you have forgotten your “network ID” or “docomo ID/password”, ⿠You will need your “network ID” for the access from i-mode.
  • Page 119 ● Please confi rm the phone number before you dial. ● For Applications or Repairs and After-Sales Service, please contact the above-mentioned information center or the docomo Shop etc. near you on the NTT DOCOMO website or the i-mode site.
  • Page 120 Installing DOCOMO Connection Manager........

  • Page 121: Data Communication Available From Foma Terminal

    FOMA terminal to an access point which does not support HIGH-SPEED or the terminal is outside the FOMA High-Speed Area, or when you use the device which does not support High-Speed such as DOCOMO’s PDA “sigmarion Ⅲ”. ≥The packet communication is charged according to the amount of data you sent and received. Note that you are charged a high communication fee for the massive data communication such as browsing Internet websites having many images or downloading data files.

  • Page 122: Before Using Data Communication

    ≥The FOMA terminal does not support the FAX communication. ≥You can perform data communications by connecting the FOMA terminal with DOCOMO’s PDA “sigmarion Ⅲ”. ≥When you perform data communication by using Bluetooth function, the high speed communication is applied to the FOMA terminal.

  • Page 123: Operating Environment

    (Dial-up Networking Profile) Display resolution 800 x 600 dots, high color 16 bits or more recommended. ≥For DOCOMO Connection Manager, display resolution 1024 x 768 dots or more recommended. Windows 7 32-bit version/64-bit version (Japanese version) Windows Vista 32-bit version/64-bit version (Japanese version)

  • Page 124: Setup Flow For Data Transfer (Obex™ Communication)

    Charge Function 01/02, install the “FOMA communication configuration file” (driver) from the provided “P-06B CD-ROM” onto the personal computer. You are advised to install “DOCOMO Connection Manager” which enables you to easily set up the APN or dial-up for communication.
  • Page 125 Connecting PC and the FOMA Terminal The following steps explain how to connect the FOMA USB Cable with Charge Function 01/02 (option). Check the direction of the Connector terminal connector terminal of the FOMA External connector terminal, then straight insert the (Face up the engraved external connector of the FOMA surface of the connector...

  • Page 126: Installing Foma Communication Configuration File (Driver)

    ≥Operate as the user who has the PC administrator right. ≥End all the programs resident on your personal computer before installing the FOMA communication configuration file (driver). Start Windows, then set the provided “P-06B CD-ROM” into the personal computer. Click “データリンクソフト・各種設...
  • Page 127 For Windows 7 “ [スタート (Start)]” 1Open “デバイスとプリンター (Devices and printers)”. Open “docomo STYLE series P-06B” 1Click the “ハードウェア (Hardware)” tab. Confirm the installed driver names. Confirm that all driver names are displayed. ≥The COM port number varies depending on the personal...
  • Page 128 For Windows Vista, Windows XP “ [スタート (Start)]”1Open “コントロールパネル (Control panel)” 1Open “システムとメンテナンス (System and maintenance)”. <For Windows XP> “スタート (Start)”→Open “コントロールパネル (Control panel)” →“パフォーマンスとメンテナンス (Performance and maintenance)”→Open “システム (System)”. Open “ハードウェアとデバイスを表示 (Show hardwares and devices)” 1Click “続行 (Continue)”. <For Windows XP> Click the “ハードウェア...
  • Page 129 “FOMA communication configuration file” (driver), the “FOMA communication configuration file” (driver) may not be installed correctly. In that case, execute “P06B_un.exe” on “P-06B CD-ROM” to delete the “FOMA communication ※ configuration file” (driver), and then install the files again.

  • Page 130: Preparing Bluetooth Communication

    < Dial-up Communication Service > Preparing Bluetooth Communication You can make data communication by connecting a Bluetooth communication compatible personal computer wirelessly to your FOMA terminal. Connect to Personal Computer for the First Time To connect a personal computer to the FOMA terminal for the first time, register the personal computer to the FOMA terminal.
  • Page 131 Confirm the Modem Before setting communication, confirm the name and COM port number of the modem used for connecting the dial-up service. For Windows 7 “ [スタート (Start)]” 1Open “デバイスとプリンター (Devices and printers)”. Open “P06B”1Click the “ハードウェア (Hardware)” tab. Confirm the modem name or COM port number. For Windows Vista, Windows XP “...

  • Page 132: Docomo Connection Manager

    DOCOMO Connection Manager “DOCOMO Connection Manager” is a convenient software program to perform flat-rate data communication and volume charging data communication. It enables you to sign up for “mopera U” and easily make PC settings according to your contract situation. It also enables you to check the estimate data traffic and usage amount with the charge counter function.

  • Page 133: Before Installing Docomo Connection Manager

    FOMA USB Cable (option). Check the service contents and the contract contents with Internet service provider. When a connection software program other than “DOCOMO Connection Manager” is installed, set it not to start automatically. ≥See page 13 for using communication software other than “DOCOMO Connection Manager”.

  • Page 134: Installing Docomo Connection Manager

    When MSXML6 and Wireless LAN API are not installed on the Windows XP environment, you need to install them before installing “DOCOMO Connection Manager”. When a confirmation display appears, click “Install” and install MSXML6/Wireless LAN API. When you restart Windows after installation of MSXML6/Wireless LAN API is completed, installation of “DOCOMO Connection Manager” automatically starts.
  • Page 135 Click “次へ (Next)”. Confirm the display precautions and click “次へ (Next)”. Confirm the licensing contract contents. If you agree with the contents, select “使用許諾契約の条 項に同意します (Agree with the licensing contract contents)” and click “次へ (Next)”. Confirm the installation destination folder, then click “次へ...
  • Page 136 Click “インストール (Install)”. Installation starts. Click “完了 (Finish)”. Installation is completed.

  • Page 137: Starting Docomo Connection Manager

    When this is the first start-up, the setting wizard appears automatically. Hereafter, proceed operation/settings following the instruction of software to complete the preparation to access the Internet. For details, refer to “ドコモ コネクションマネージャ操作マニュアル.pdf (DOCOMO Connection Manager operation manual by PDF format)”.

  • Page 138: Setting Dial-Up Network

    AT command is required. “Hyper Terminal”, which is attached to Windows as the standard software, is used here for explanation. When using DOCOMO Internet access service “mopera U” or “mopera”, you do not need to set an access point name (APN) (see page 21).
  • Page 139 (driver). The confirmation method varies depending on the operating system of your personal computer. ≥When using DOCOMO Internet access service “mopera U” or “mopera”, you do not need to set an access point name (APN); therefore, you do not need to confirm the modem.
  • Page 140 Open the “モデム (Modem)” tab, confirm the COM port number in the “接続先 (Access point)” field of “FOMA P06B”, then click “OK”. ≥When connecting wirelessly using Bluetooth communication, confirm the COM port number of the in-use Bluetooth linked standard modem or Bluetooth modem provided by a Bluetooth device maker in the “接続先...
  • Page 141 Set an Access Point Name (APN) This section explains how to set an access point name (APN) for packet communication. You can register up to 10 access point names (APNs), which are managed with cid1 to cid10 (see page 23). When using “mopera U”...
  • Page 142 Select a connection method. <When you can select the COM port number of “FOMA P06B”> Select the COM port number with which you install the “FOMA P06B” in the “接続方法 (Connection method)” field, then click “OK”. Then, go to step 6. ≥Here, “COM3”...
  • Page 143 Confirm that “OK” appears on the display. “ファイル (File)” menu1Select “ハイパーターミナルの終了 (Exit Hyper Terminal)” to exit Hyper Terminal. ≥If the message “現在、接続されています。切断してもよろしいですか? (Currently connected. Do you want to disconnect this line?”) appears, select “はい (Yes)”. ≥The message “セッションXXXを保存しますか? (Do you want to save session XXX?)” then appears. You do not need to especially save that session.
  • Page 144 Confirm that “OK” appears on the display. Information ≥When using DOCOMO Internet access service “mopera U” or “mopera”, you need to set your caller ID to be “notified”. ≥If the entered AT command is not displayed, enter “ATE1 ”. ■Specifying “caller ID notified/not notified” in dial-up network Also by dial-up network setting (see page 27), you can add “186 (notify)”...
  • Page 145 Set Dial-up Network for Windows 7 “ [スタート (Start)]” 1Open “コントロールパネル (Control panel)” 1“インターネットへの接続 (Connection to Internet)” 1Click “ダイヤルアップ接続 (Dial-up connection)”. ≥After the access point has been set, the confirmation display appears asking whether the existing connection is to be used.
  • Page 146 Highlight the access point which is finished with setting, and select “プロパティ (Property)” after the right click 1Click the “全般 (General)” tab to confirm the setting contents. When two or more modems are connected to your personal computer, confirm that “モデム (Modem) - FOMA P06B” or “モデム...
  • Page 147 Set Dial-up Network for Windows Vista “ [スタート (Start)]”1“接続先 (Access point)”1Click “接続または ネットワークをセットアップします (Setup the connection or network)”. Select “ダイヤルアップ接続を セットアップします (Setup the dial-up connection)”, then click “次へ (Next)”. If the display for selecting a modem appears, click “FOMA P06B”. ≥When connecting wirelessly using Bluetooth communication, put a check mark for only the in-use Bluetooth linked standard modem or Bluetooth modem provided by a Bluetooth device maker.
  • Page 148 Click the “全般 (General)” tab to confirm the setting contents. When two or more modems are connected to your personal computer, confirm that “モデム (Modem) - FOMA P06B” or “モデム (Modem) - the name of the in-use Bluetooth linked standard modem or Bluetooth modem provided by a Bluetooth device maker”...
  • Page 149 Set Dial-up Network for Windows XP “スタート (Start)”1“すべてのプログラム (All programs)” 1“アクセサリ (Accessories)”1“通信 (Communications)” 1Open “新しい接続ウィザード (New connection wizard)”. When the “新しい接続ウィザード (New connection wizard)” display appears, click “次へ (Next)”. Select “インターネットに接続する (Connect to the Internet)”, then click “次へ (Next)”. Select “接続を手動でセットアップする (Manually set up the connection)”, then click “次へ...
  • Page 150 Enter an access point number in the “電話番号 (Phone number)” field, then click “次へ (Next)”. ≥When connecting to “mopera U”, enter “¢99¢¢¢3#” as the access point number. See page 23 for access point numbers other than “mopera U”. Enter the user name and password supplied from your Internet service provider or network administrator in the...
  • Page 151 Click the “全般 (General)” tab to confirm the setting contents. When two or more modems are connected to your personal computer, confirm that “モデム (Modem) - FOMA P06B” or “モデム (Modem) - the name of the in-use Bluetooth linked standard modem or Bluetooth modem provided by a Bluetooth device maker”...

  • Page 152: Making Dial-Up Connection

    Making Dial-up Connection Making Dial-up Connection for Windows 7 Perform the operation on page 5 to connect the FOMA terminal to your personal computer. “ [スタート (Start)]”1Open “コントロールパネル (Control panel)” 1Click “インターネットへの接続 (Connection to Internet)”. Check “はい、既存の接続を選びま す (Yes, I choose the existing connection)”, then select the access point, and click “次へ...
  • Page 153 Making Dial-up Connection for Windows Vista Perform the operation on page 5 to connect the FOMA terminal to your personal computer. “ [スタート (Start)]”1Open “接続先 (Access point)”. Select access point and click “接続 (Connect)”. Confirm the contents and click “ダイヤル (Dial)”. ≥When connecting to “mopera U”...
  • Page 154 Making Dial-up Connection for Windows XP Perform the operation on page 5 to connect the FOMA terminal to your personal computer. “スタート (Start)”1“すべてのプログラム (All programs)” 1“アクセサリ (Accessories)”1“通信 (Communications)” 1Open “ネットワーク接続 (Network connection)”. Open the access point to be used. Select the access point icon of the ISP name (see page 29) you specified in “Set Dial-up Network”, then “ネットワークタ...

  • Page 155: Connecting And Disconnecting

    Your personal computer ･ Confirm whether your personal computer satisfies the operating environment (see page 3). cannot recognize “P-06B” ･ Confirm whether “FOMA communication configuration file” (driver) is installed in your personal computer. ･ Confirm whether the FOMA terminal is connected to your personal computer and powered on.

  • Page 156: At Command

    AT Command AT commands are used to specify and modify the functions of the FOMA terminal through the personal computer. ※The following abbreviations are used in the AT command list: [AT]: Commands which are available at the FOMA P06B Command Port. [M]: Commands which are available in the FOMA P06B (modem).

  • Page 157: At Command List

    AT Command List Command execution AT command Outline Parameter/Explanation example Re-executes the last executed − command. No carriage return is required. AT%V Displays the version of the AT%V − FOMA terminal. Ver1.00 AT&Cn Selects the operating conditions n=0: CD is always ON. AT&C1 of the circuit CD signal sent to n=1: CD varies according to the carrier of the other...
  • Page 158 Command execution AT command Outline Parameter/Explanation example AT¢DGPIR=n This command is valid at dialing/ n=0: Uses the APN as it is. (default) AT¢DGPIR=0 receiving calls. n=1: Adds “184” to the APN. (always not notify) In the dial-up network setting, n=2: Adds “186” to the APN. (always notify) AT¢DGPIR? you can add “186”...
  • Page 159 Command execution AT command Outline Parameter/Explanation example AT+CGREG=n Sets whether the network n=0: Not notified. (default) AT+CGREG=1 registration state is notified. n=1: Notified at switching between the inside and Displays whether you are inside outside of the service area. (set to “Notified”) or outside the service area (Inquiry) AT+CGREG?
  • Page 160 Command execution AT command Outline Parameter/Explanation example AT+COPS=n,2,m Selects the carrier to be n=0: Automatic (searches the network and switches the AT+COPS=1,2,"44F001" connected. network operator automatically) (default) n=1: Manual (connects to the network operator specified in “m”) n=2: Disconnects the connection to the network operator n=3: Mapping is not performed.
  • Page 161 AT+GMI Displays the manufacturer name AT+GMI − (Panasonic). Panasonic AT+GMM Displays the product name AT+GMM − (FOMA P-06B) of the FOMA FOMA P06B terminal. AT+GMR Displays the version of the AT+GMR − FOMA terminal. Ver1.00 AT+IFC=n,m Selects the flow control method. n: DCE by DTE...
  • Page 162 Command execution AT command Outline Parameter/Explanation example ATIn Displays the ID code. n=0: Displays “NTT DoCoMo”. ATI0 n=1: Displays the product name. (same as +GMM) NTT DoCoMo n=2: Displays the version of the FOMA terminal. (same as +GMR) ATI1 n=3: Displays ACMP information element.
  • Page 163 Command execution AT command Outline Parameter/Explanation example ATZn Resets the setting to the Only n=0 is specifiable. (Can be omitted) (In online) contents of the nonvolatile memory. If this command is NO CARRIER entered during communication, (In offline) the line is disconnected. AT¥Sn Displays the contents of the each Only n=0 is specifiable.
  • Page 164 ≥Command name: +CGEQMIN=[parameter] ･ Outline This command registers the reference value to judge whether the system permits QoS (Quality of service) reported from the network at establishment of the packet communication. You can specify four setting patterns described in the command execution example below. ･...

  • Page 165: Result Codes

    Disconnection Reason List ■64K Data Communication Value Reason The specified number does not exist. The line was normally disconnected. Cannot communicate because the other party is communicating. Dialed but no response has come in within the specified duration. Cannot communicate because the other party is dialing. The other party rejected to receive the call.
  • Page 166 For &E1 Numeric Character notation Connection speed notation CONNECT 1200 1,200bps CONNECT 2400 2,400bps CONNECT 4800 4,800bps CONNECT 7200 7,200bps CONNECT 9600 9,600bps CONNECT 14400 14,400bps CONNECT 19200 19,200bps CONNECT 38400 38,400bps CONNECT 57600 57,600bps CONNECT 115200 115,200bps CONNECT 230400 230,400bps CONNECT 460800 460,800bps...
  • Page 167 P-06B Kuten Code List...
  • Page 168 <How to read Kuten Code List> First enter the number for “Kuten digit 1 to 3”, and enter the number for “Kuten digit 4”. ≥Some characters in Kuten Code List may appear different on the display. Kuten Kuten Kuten Kuten digit 4 Kuten digit 4 Kuten digit 4 digit...
  • Page 169 Kuten Kuten Kuten Kuten digit 4 Kuten digit 4 Kuten digit 4 digit digit digit 1 to 3 1 to 3 1 to 3 讃 賛 酸 餐 斬 暫 残 【 た 】 函 箱 硲 箸 肇 筈 櫨 幡 肌 【...
  • Page 170 Kuten Kuten Kuten Kuten digit 4 Kuten digit 4 Kuten digit 4 digit digit digit 1 to 3 1 to 3 1 to 3 揚 揺 擁 曜 楊 様 洋 溶 熔 用 圷 圸 坎 圻 址 坏 坩 埀 垈 坡 椢...
  • Page 171 Kuten Kuten Kuten Kuten digit 4 Kuten digit 4 Kuten digit 4 digit digit digit 1 to 3 1 to 3 1 to 3 竊 竍 竏 竕 竓 站 竚 竝 竡 竢 誨 誡 誑 誥 誦 誚 誣 諄 諍 諂 鷯...

Table of Contents