Technical Specifications - Flex ALC 3/1–Basic Original Operating Instructions

ALC3-1.book Seite 15 Donnerstag, 25. Juni 2015 1:00 13

Technical specifications

Cross-line laser ALC 3/1
Visible laser diode
Laser class
Work area
– Horizontal/vertical beam
– Ground beam (plumb)
Precision ...
– Horizontal/vertical beam
– Ground beam (plumb)
Self-levelling range
Power supply
2)
Operating duration
Temperature range
– for operation
– for storage
Weight (with batteries)
1) The measurement range may be less under
2) The operating duration was determined with
635–650 nm
2
Instructions for use
1)
20 m
5 m
– Do not point the laser beam at people
± 0.3 mm/m
± 0.6 mm/m
– Do not look into the laser beam.
– Do not put any optical instruments in the
± 4°
3 x LR6/AA
This measuring instrument generates laser
radiation which may cause blindness.
6 h
– Do not use the measuring instrument
–5 °C ... 50 °C
–20 °C ... 70 °C
584 g
– After using the device, immediately switch it
unfavourable conditions (bright sunlight,
reflective surfaces).
all activated laser beams.
The operating duration can be extended
if beams which are not required are switched
off by selecting a different operating mode.
WARNING!
or animals.
path of the beam.
CAUTION!
in a damp, dusty or sandy environment.
Device components may be damaged.
off with the On/Off switch in order to block
self-levelling.
FLEX ALC 3/1–Basic
15