Bowers & Wilkins T7 Wireless Manual page 3

1. T7 Wireless Carton Contents
• T7 Wireless speaker.
• T7 Wireless power supply.
• Regional plugs adapters.
• Literature pack
Environmental Information
This product complies with international directives,
including but not limited to the Restriction of
Hazardous Substances (RoHS) in electrical and
electronic equipment, the Registration, Evaluation,
Authorisation and restriction of Chemicals (REACH)
and the disposal of Waste Electrical and Electronic
Equipment (WEEE). Consult your local waste
disposal authority for guidance on how properly to
recycle or dispose of this product.
Note: T7 Wireless is not waterproof and is not
intended for use in high humidity environments
such as bathrooms, swimming pools and
saunas.
2. Getting to know T7 Wireless
T7 Wireless is a Hi-Fi speaker built with maxiumum
portability in mind. Once switched on via the Power
button on its right hand side, it is controlled via
Bluetooth, Play/Pause, Volume + and Volume –
buttons on its top panel. A blue indicator adjacent to
the Bluetooth button displays Bluetooth connection
state and a column of white indicators above
the Power button displays battery charge level.
T7 Wireless also provides audible feedback for some
control commands and events.
Connections on the back of T7 Wireless include a
power supply input, auxiliary input (3.5mm stereo
jack), and service port used for firmware updates
only (micro-USB). A pin-hole Reboot button is also
located on the back of T7 Wireless.
Bluetooth pairing Play/Pause
On / Off / Check Battery Power
Diagram 1
Buttons and connection sockets.
Volume down Volume up
Auxiliary Service Reboot
(Firmware
update only)
3