Before You Begin Cleaning - Vax ACTION 602 U86-AN-BE Get Started

PLEASE READ 'LET'S TALK SAFETY' AT THE BEGINNING BEFORE USE

Before you begin cleaning

IMPORTANT: Always switch off the vacuum cleaner before connecting or disconnecting the hose/attachments
or removing and emptying the dirt container.
IMPORTANT: The vacuum cleaner is equipped with a thermal cut-out. If for any reason the vacuum cleaner does
overheat the thermostat will automatically turn the vacuum cleaner off. If this happens switch the vacuum cleaner off
and unplug from electrical socket. Remove and empty the dirt container also check the vacuum cleaner for blockages.
Allow the vacuum cleaner to cool for approximately 1 hour (if you have cleaned the filters please wait 24 hours for the
filters to fully dry before putting back into the machine).
Filters require cleaning at least every 3-6 months. If the vacuum cleaner is blocked, switch off and unplug before
removing the blockage.
When the vacuum cleaner is stood in the upright position, or when using the hose and tools the brush bar height adjuster
must be set to the highest setting.
Assembling your vacuum cleaner
Lift handle up and click
into place.
Push extension tube and
crevice onto holder.
Line up latch on accessory hose,
push until clicks into place.
Slide 2 in 1 Dusting Brush onto
dust brush holder with brushes
facing outwards.
Getting started
Push accessory hose into
hose to machine connector.
Line up turbo tool brushes into
turbo tool holder, push into place
until it clicks (some models only).