Advertisement
PLEASE READ 'LET'S TALK SAFETY' AT THE BEGINNING BEFORE USE
Before you begin cleaning
• Always switch off and unplug the vacuum cleaner before connecting or disconnecting the hose/attachments,
or removing and emptying the dirt container.
• The vacuum cleaner is equipped with a thermal cut-out. If for any reason the vacuum cleaner does overheat the
thermostat will automatically turn the vacuum cleaner off . If this happens, switch the vacuum cleaner off and unplug
from electrical socket. Remove and empty the dirt container also check the vacuum cleaner for blockages. Allow the
vacuum cleaner to cool for approximately 1 hour (if you have cleaned the fi lters please wait 24 hours for the fi lters
to fully dry before putting back into the vacuum cleaner).
• Clean the pre-motor fi lter every time the dirt container is emptied and replace the post-motor fi lter every 12 months.
• If the vacuum cleaner is blocked, switch off and unplug before removing the blockage.
Assembling your vacuum cleaner
Press both buttons at end
of hose and insert into
hose entry point.
Press button on telescopic
extension tube and adjust
to required length.
Insert hose grip into
telescopic extension tube.
Insert the other end
of the telescopic tube
into the fl oorhead.
Getting started
Advertisement
