Isgus PERFECT 2040 Operating Manual page 159

3. Press the function key again. The following display
message appears:
CARD DELET.WITH
C.OVER WEEKQUAL
4. Insert the time card to be deleted.
Hint: The function remains active for about 8 seconds. For
safety reasons, if no card is inserted during this time, the
display will revert to the date and time indicating a return to
the normal operating mode. This process can be repeated
as often as it is required.
On the bottom line of the time card the following note is
printed:
CARD DELETED WITH CARRYOVER WEEK
This serves to inform the user that the time card and its
totals are no longer saved in the time recorder.
5. Remove the card.
The following display appears:
6. Insert the new time card.
Hint: The function remains active for about 8 seconds. For
safety reasons, if no card is inserted during this time, the
display will revert to the date and time indicating a return to
the normal operating mode. This process can be repeated
as often as it is required, but always starting from step 1.
The time recorder is verifying, if the new time card number
is its memory. If the number already exists, it rejects the
new card with the display message:
If the time recorder accepts the card, the new card number
and the carried over worked hours necessary for reaching
the weekly qualification from the old time card are written
into the memory. They are printed on the new card with the
current date and the card number of the old card.
Afterward the record of the old time card number is deleted
automatically.
Chapter 5
QUALIFICATION HOURS
CARD BEING USED
Operation 5-17