Print Out Of Program Settings - Isgus PERFECT 2040 Operating Manual

Print out of Program Settings

The recorder offers two possibilities to print out all customer specific program
settings:
- the individual menu items, successively during the programming process
- complete, after the programming by selection of menu "Protocol Print"
For a complete protocol print out 6 time cards are required.
Hint
In order not to initiate an IN or OUT punch while printing the
protocol print out of the program settings, the back of a card
(side with the barcode towards the user) must be entered.
Procedure for protocol print out during the programming process:
1. Call-up programming menu and
select menu "ENT.EXISTING PIN" .
2. Insert a blank card
3. Select the values for menu
"ENT.EXISTING PIN
The adjustments and values of this menu is not printed
4. Continue with menu "PRINT FORMAT"
5. Select the values for menu "PRINT FORMAT"
6. The card is retracted into the card receiver, the print procedure
is started and the recorder continues with next menu "PUNCH ROUNDING".
7. For the next print out the card remains in the receiver.
8. Select values for the following menus and
start printing procedure for each menu.
When a card is complete, the recorder prompts the insertion
of a new card with the message
"------------INSERT NEW CARD-------------
9. Remove card, when programming has been finished.
4-108 Getting Started Chapter 4
("R" key)
("R" and "E" key
("S" key)
("R" and "E" key)
("S" key)
("R" and "E" key)
("S" key)