Uninstalling The Usb Driver; Uninstalling The Video Driver; Uninstalling The Twain Driver - Ricoh RDC-6000 Installation Manual

II. Uninstalling the USB driver
(1) Connect the camera to the computer via the USB cable. Make sure the
mode dial is set to PC Mode, then turn the camera on.
(2) Select the System icon from the Control Panel. Select the Hardware tab
from the System Properties window that appears.
(3) In the Hardware tab, click the Device Manager button.
(4) In the device manager, click on the plus sign (+) beside Universal Serial
Bus controllers, then select RICOH RDC-6000.
(5) Right-click on RICOH RDC-6000 and select Uninstall from the context
menu that appears.
III. Uninstalling the video driver
(1) Open the Control Panel and select Add or Remove Programs.
(2) In the Add or Remove Programs window, select the RDC6000 Video Capture Drivers and click
Change/Remove.
(3) Click Yes to confirm that you want to remove this software.
(4) When the unInstallShield wizard finishes the uninstallation, click OK to close the window.
IV. Uninstalling the TWAIN driver
(1) Open the Control Panel and select Add or Remove Programs.
(2) In the Add or Remove Programs window, select the RDC6000 TWAIN Drivers and click
Change/Remove.
(3) Click Yes to confirm that you want to remove this software.
(4) When the unInstallShield wizard finishes the uninstallation, click OK to close the window.
RDC-6000 Windows XP Installation Guide - 7