Table of Contents
Advertisement
Adjusts the horizontal width of the image. This function is only available when a PC
H. Size
signal (analog RGB) is selected.
Magnifies or reduces the projected image.
1. After the Zoom bar displays, press
2. To navigate the picture, press MODE/ENTER to switch to the panning mode
Digital Zoom
3. To reduce size of the picture, press MODE/ENTER to switch back to the
The picture can only be navigated after it is magnified. You can further magnify the picture while
searching for details.
This projector features a 3D function which enables you to enjoy the 3D movies,
videos, and sporting events in a more realistic way by presenting the depth of the
images. You need to wear a pair of 3D glasses to view the 3D images.
• 3D Mode: The default setting is Off. If you want the projector to automatically
choose an appropriate 3D format when detecting 3D contents, select Auto. If the
projector cannot recognize the 3D format, press
among Top Bottom, Frame Sequential, Frame Packing and Side by Side.
When 3D function is activated:
• The brightness level of the projected image will decrease.
• The following settings cannot be adjusted: Picture Mode, Reference Mode.
3D
• The 2D Keystone can only be adjusted within limited degrees.
• 3D Sync Invert: When you discover the inversion of the image depth, enable
this function to correct the problem.
• Save 3D Settings: When you have successfully displayed the 3D contents after
making the appropriate adjustments, you can enable this function and choose a set
of 3D settings to memorize current 3D settings.
• Apply 3D Settings: After the 3D settings are saved, you can decide if you would
like to apply them by choosing a set of 3D settings that you have saved. Once
applied, the projector will automatically play the incoming 3D contents if it
matches the 3D settings saved.
Only the set(s) of 3D settings with memorized data is available.
The projector provides several preset patterns for various teaching purposes.
1. Press
Teaching
2. Press
Template
3. Press ENTER to display the pattern.
desired size.
and press the directional arrows ( ,
control to navigate the picture.
zoom in/out function, and press AUTO to restore the picture to its original
size. You can also press repeatedly until it is restored to the original size.
/
to select Blackboard or Whiteboard.
/
to choose the pattern you need from among Letter Formation,
Worksheet and Coordinate Chart.
repeatedly to magnify the picture to a
,
,
) on the projector or remote
/
to choose a 3D mode from
Menu operation
27
Advertisement
Table of Contents
