Panasonic WV-X6531N Important Information Manual page 22

Connecting to a network using a PoE+ hub when the temperature is –30 °C
{–22 °F} or less
* When the temperature is –30 °C {–22 °F} or less, use a 24 V AC power supply or a tested PoE
injector.
<Required cable> Ethernet cable (category 5e or better, straight)
Powered
Adjustment monitor
speaker
(for adjustment use only)
*
Plug-in power type
microphone
Powered
speaker
Plug-in power type
microphone
IMPORTANT:
• Use a switching hub or a router which is compliant with 10BASE-T/100BASE-TX.
• If a PoE+ hub is not used, each network camera must be connected to a 24 V AC power
supply.
• When using 24 V AC, power supply from a PoE+ hub or router is not required.
RJ45 waterproof connector
Ethernet cable
(category 5e or
better, straight)
➡ 24 V AC
Adjustment monitor
(for adjustment use only)
*
RJ45 waterproof connector
* The audio output can be switched to the monitor
output. When using the monitor output, audio
output is not available.
Hub, router
Ethernet cable
(category 5e or better, straight)
power supply
Ethernet cable
(category 5e or better, straight)
22
PC
Tested PoE injector