Automatically Updating The Clock - Sangean U4 DBT Operating Instructions Manual

Automatically updating the clock

. Press the Power button to switch on your radio.
. Press and release the Menu button until the Advanced menu of
the current mode shows on the display.
3. Rotate the Tuning control until 'System ' appears on the display.
Press and release the Tuning control.
4. Rotate the Tuning control until 'Time' appears on the display.
Press and release the Tuning control.
5. Rotate the Tuning control until 'Auto update' appears on the display.
Press and release the Tuning control.
6. Rotate the Tuning control to choose an update option from 'Update
from Any', 'Update from DAB', Update from FM' or 'No update' as
required. The current update option will be marked with an asterisk.
Press and release the Tuning control to confirm your choice. The
radio will exit to the previous menu.
Note:
If you select 'Update from Any', 'Update from DAB', Update from
FM' the current time received will be displayed. If no signal is found
you should either position the radio or its antenna so that a signal
can be received, or revert to manual clock mode.
35