Manual Tuning - Dab - Sangean U4 DBT Operating Instructions Manual

Manual tuning - DAB

Manual tuning allows you to tune your radio to a particular DAB
frequency in Band III. Any new stations found will be added to the
station list. This function can also be used to assist the positioning of
the antenna or the radio to optimize reception for a specific channel
or frequency.
. Press and release the Menu button until the Advanced DAB
menu shows on the display.
. Rotate the Tuning control until the display shows 'Manual tune'.
3. Press and release the Tuning control to enter the manual tuning
mode.
4. Rotate the Tuning control to select the desired DAB channel.
5. Press and release the Tuning control. The open block in the signal
strength graph shows the minimum signal strength needed for
good DAB reception. The signal blocks will go up and down
showing the changing signal strength as you adjust the antenna
or the radio position. Any new radio stations found on the tuned
DAB multiplex will be added to the list stored in the radio.
6. Press and release the Tuning control to return to normal tuning
mode.
7