The only party responsible for determining valid measured Declaration of conformity ............. 6 results, drawing conclusions and deriving actions is the user! Trotec accepts no claims of warranty for the correctness of the determined measured values or measured results. Further, Notes regarding the operating manual...
Caution To prevent damages to the device, do not expose it to extreme temperatures, extreme humidity or moisture. Caution Do not use abrasive cleaners or solvents to clean the device. Operating manual – clamp meter BE 38...
Measuring resistance of up to 2000 Ω / diode testing / continuity testing Measuring DC voltage of up to bis 300 V Measuring AC voltage of up to bis 300 V Measuring alternating current of up to 400 A Operating manual – clamp meter BE 38...
Please observe the measuring range and the overvoltage protection! Measurements above the given measuring range are not permitted! Scope of delivery • 1 x Clamp meter BE38 • 3 x button cells 3 V CR2032 • 1 x Getting started guide Operating manual – clamp meter BE 38...
In this case, the display shows either no measured values or they are incorrect. Wait a few minutes until the device has become adjusted to the changed conditions before carrying out a measurement. Operating manual – clamp meter BE 38...
Detlef von der Lieck but only clean water to moisten the cloth. Managing Director Repair Do not modify the device or install any spare parts. For repairs or device testing, contact the manufacturer. Operating manual – clamp meter BE 38...
Page 8
Trotec GmbH & Co. KG Grebbener Str. 7 D-52525 Heinsberg +49 2452 962-400 +49 2452 962-200 info@trotec.com www.trotec.com...