Coding
Resetting codes to the factory default setting
1. Press w and rw simultaneously for approx. 2 seconds.
Coding 1
Calling up coding 1
1. Press 9 and w simultaneously for approx. 2 s.
2. Select the required coding address with
the address flashes;
confirm with
,
the value flashes.
3. Change the value with
confirm with
.
The display briefly shows "Accepted", then the address
flashes again.
Call up further addresses
with
or
.
4. Press 9 and w simultaneously for approx. 1 second.
50
or
,
or
;
2. Press D.
Confirm "Standard setting? Yes" with
With
or
, "Standard setting? Yes" or "Standard
setting? No" can be selected.
.