PSC SP400 Manual page 33

5. Scan the SET SECOND FIXED LENGTH label.
6. Set the second fixed label length by scanning the correct
digits from this page. The selectable range is from 03 to 50
7. Scan the END label to complete the procedure.
0 -----------------------------
1 -----------------------------
2 -----------------------------
3 -----------------------------
4 -----------------------------
5 -----------------------------
6 -----------------------------
7 -----------------------------
8 -----------------------------
9 -----------------------------
END -------------------------------------
1 The scanner will decode up to 50 characters, but the actual length read will vary
depending upon bar code size and quality. The IBM POS interface is limited to 32
character labels.
R44-1542
1
.
2 9