PSC SP400 Manual page 28

I
NTERLEAVED
The Interleaved 2 of 5 symbology has the following programmable features:
Check Digit — calculate the Check Digit to verify that the
Check Digit contained in the bar code label is correct. If you
enable this feature, your bar codes must contain a Check
Digit.
You may also choose to transmit or not transmit the Check
Digit independent of whether the Check Digit is calculated by
the scanner. Transmit Check Digit will have no effect unless
the Compute Check Digit feature is enabled. If you choose
Don't Compute Check Digit, the scanner sends the Check Digit
encoded in the bar code without verifying its accuracy. If
you choose both Compute Check Digit and Don't Transmit
Check Digit, the scanner will remove the Check Digit's
contents before sending the bar code data to the host.
Variable Length — If you select variable length, the scanner will
recognize labels with an even number of characters between the
minimum length set (see the following section) and 50
SET -------------------------------------
D
ON
C
OMPUTE
D
ON
T
RANSMIT
E
NABLE
D
ISABLE
END -------------------------------------
2 4
SP400/QuickScan 6000/6000 Plus Keyboard Wedge I/F Prog
2 5
OF
' ----------------
T COMPUTE
----------------------
' ---------------
T TRANSMIT
---------------------
------------------------
-----------------------
1
characters.