Firmware Update; Usb U - Doremi Dimension-3D User Manual

6 Firmware Update

The firmware can be updated through the USB connection or through a Secure Digital (SD)
memory card. This section presents both methods. In case one of the files listed below, in the
procedures, is missing, please contact Doremi labs, Inc. at www.doremilabs.com.
6.1 USB Update
The firmware can be updated through USB using the Doremi Universal Interface GUI as presented
in Section 5.4.7 .
To perform a update through USB follow the steps below:
•
Connect the Dimension-3D to a computer using the USB cable provided with the unit.
•
Start the Doremi Universal Interface GUI (Section 5 ).
•
Go to the "System Tab" (Section 5.4.7 ).
•
Click on the "Firmware upgrade" button.
•
•
Select the firmware file (e.g., "DIMENSION_3D_1.8.0bin") and click on the "Upgrade now"
button (Figure 20).
Once the update is complete turn off the unit and then power it back on.
•
DM3.OM.001026.DRM
Figure 20: Firmware Update Window
Page 45
Doremi Labs Inc.
Version 1.4