Image Tab - Doremi Dimension-3D User Manual

5.4.3 Image Tab

The "Image" tab is illustrated below:
•
Figure 13: Doremi Universal Interface GUI – Image Tab
Note: All parameters are explained in this manual in Section 3 "Dimension-3D Front Panel
Controller."
•
The "Input" and "Output" LUT values can be changed using the sliders (Figure 13).
•
Gamma curves can also be changed as well (Figure 13).
•
Select the "User" check-box in the "Input" and "Output" LUT field (Figure 13).
• Click the "Gamma Curves ..." button (Figure 13).
The following window will appear:
•
DM3.OM.001026.DRM Page 37
Doremi Labs Inc.
Brightness
Cursor
Contrast
Cursor
Output LUT
Cursor
Version 1.4