System Menu - Doremi Dimension-3D User Manual

3.9 System Menu

The following menu allows access to the system parameters:
•
Recall
Save
Firmware: x.y
Serial: zzzzzzz
License: uuuuuuuu
Temp: vv C
Standby
Auto Standby
IR
SD memory update
DM3.OM.001026.DRM
Sub-Menu
Doremi Labs Inc.
Description
Load one of the 3 saved presets, the
default settings or factory settings.
Once the desired preset is loaded a "#"
will appear next to the title.
(See Section 3.9.1 )
Save the Current settings as the default
setting on boot or to one of the three
presets.
Once the desired preset is saved a "#"
will appear next to the title.
(See Section 3.9.1 )
Factory Reset? (unit will reboot
automatically).
Firmware version
Serial number
License number
Temperature (in degree Celsius)
Standby mode. Put the unit in Standby
Power Saving mode
Auto Standby mode. Set the idle time
duration before the unit goes in power
down mode automatically:
Off
60 Minutes
120 Minutes
Infra-Red. To avoid IR interference when
there are multiple Dimension-3D units,
the user can assign each a different IR
code from 0x0 to 0xF (16 total). The
default IR code is 0. The user needs to
set the DIP switch on the Doremi IR
remote accordingly.
SD memory firmware update.
Page 25 Version 1.4