5 Doremi Universal Interface Software (DUIs)
5.1 Doremi Universal Interface Installation
To install the Doremi Universal Interface software follow the steps below:
•
Plug the provided USB cable between the Dimension-3D and an available USB port on the
•
PC. See Figure 3 for the USB connector location.
Power on the Dimension-3D.
•
If the "Found New Hardware Wizard" window appears, at this stage, click "Cancel".
•
•
Run the installation package by double-clicking on a file
"Doremi_Universal_Interface_Software-1.4.0.exe", which can be downloaded from
http://www.doremilabs.com/
After the installation is over the "Found New Hardware Wizard" window will appear.
•
Go through all the steps as written below:
•
Select the "No, not this time" option and click on "Next >" (Figure 6).
•
Click The "No, not
this time" Option
•
When asked for the type of software installation, choose the option "Install the software
automatically (Recommended)" (Figure 7).
DM3.OM.001026.DRM
Figure 6: "Found New Hardware Wizard" Window – Step 1
Page 30
Doremi Labs Inc.
Version 1.4