Sync Menu - Doremi Dimension-3D User Manual

Sub-Menu
Left Flip
Right Flip
Z Offset

3.6 Sync Menu

The following menu can be used to set up the sync parameters:
•
Sub-Menu
Input
Output
H offset
V offset
DM3.OM.001026.DRM
Value
Off
H Flip
V Flip
Off
H Flip
V Flip
0 to +/- 50 Pixels
Value
Auto
SDI
HDM
Extern
Auto
Force Bi-Level
X pixels
X lines
Page 22
Doremi Labs Inc.
Description
Flip the polarity of the Left Eye
image
H Flip – Flip the image
horizontally
V Flip – Flip the image vertically
Flip the polarity of the Right Eye
image
H Flip – Flip the image
horizontally
V Flip – Flip the image vertically
3D Depth adjustment
Description
Sync input setting
Auto: Sync is derived from the
input source.
Extern: Sync is derived from the
Sync Input connector.
Sync output setting
Auto: Always Tri-Level
Force Bi-Level only if output is
29.97, 25, 50 or 59.94.
Adjust Horizontal Offset in
number of pixels (0).
Adjust Vertical Offset in number
of lines (0).
Version 1.4