2.1.3 Dimension-3D Front Panel
A snap shot of the front panel is illustrated below:
•
SD Card
The front panel LCD screen shows the status of the Dimension-3D. It can also be used in
•
conjunction with the scroll wheel to modify the device settings.
The scroll wheel with built in "Select" button and the "ESC" (escape) button can be used to
•
navigate the menu structure and modify the settings (Figure 2).
The four LED indicators reflect the status of the various input signals.
•
1) SDI-A LED
2) SDI-B LED
3) HDMI LED
4) SYNC LED
The "PWR" (power) button LED lights up when the Dimension-3D is powered on.
•
The infra-red sensor can be used to remotely control the Dimension-3D (Section 4).
•
A SD memory connector is available and can be used to perform firmware updates
•
(see Section 6 for details).
DM3.OM.001026.DRM
Menu Wheel
Status LEDs
Escape Button Infrared Sensor
Figure 2: Dimension3D Front Panel View
Page 11
Doremi Labs Inc.
Power LED
Power Switch
Version 1.4