Advanced Settings - Alecto IVM-200 User Manual

4.3

ADVANCED SETTINGS.

Login:
Before you go to the advanced settings menu, you first need to log in with a
password. The password is the same as the SSID code for the camera in "pairing"
mode. The default password is "12345678".
Press the button to fill in the password. After entering the correct password, the
following screen will appear.
Wi-Fi Setting:
Join Home AP:
Camera Setting:
Notification Setting:
Upload MP3:
Night Light Setting:
Reset to Default:
Wi-Fi Settings:
(only available via internal network)
In this menu you can set the SSID name and change the password. The SSID name
is the name of the camera that shows on your Wi-Fi if you want to make a direct
connection with your smartphone or tablet. By default, the name is "Alecto_IVM-200."
When using multiple cameras, it is useful to change the name.
You can change the password of the camera in this menu. This is to prevent any
misuse of the images by others. This is to prevent any misuse of the images by
others. The password should contain 8 characters. After changing the password,
Wi-Fi settings of the camera to setup a direct connection to
the camera. You can change the password of the camera
here.
Access the point settings from your router to be able to
establish a network and Internet connection with the camera.
Set the frame rate and resolution of the image .
Alarm settings for sound detection and the temperature
alarm.
Your own music can be uploaded here so you can play
lullabies of your choise to your baby.
Setup the light for the night light.
Reboot to factory settings.
14