Talk back into the baby room:
You can speak into the baby's room by using the talkback button from either your
smartphone or tablet. Your voice will come through the loud speaker located in the
camera. Press the
into the microphone on the smartphone or tablet. Your voice will be heard in the
baby's room. The volume level of your voice can be set as described in the following:
Set the camera audio volume by pressing the
If the audio volume is muted (with this
temporarily disabled if the talk function is turned on by pressing the
icon will then re-appear.
Playing music in the baby room:
Music can be played into the baby room from the smartphone or tablet.
The music will be heard from the loudspeaker in the camera.
The music played should be saved as an mp3 music file on your smartphone or
tablet. Press the
When the files are scanned, a list of music files will appear. Now choose the music
you want to play.
The selected music will now be played.
To stop the music prematurely, press the
file". The volume of the music can be set as described here: Set the audio volume of
the camera by pressing the
NOTE: If the mp3 play list on your smartphone or tablet is large, it may take a while
before the list is loaded. If it seems that nothing is happening, be patient until the
entire list is loaded. This also applies if you want to stop playing the music. Press the
button, to start loading the list again.
The "Talk back to the nursery" and "Play music to the nursery" functions are only
available when the smart phone or tablet is connected to the same local network as
the camera. Connecting your smartphone or tablet to these functions from outside
the local network will not be possible because of the bandwidth limitations. The icons
and
in the app. will disappear.
button. The icon will now change to icons
button to scan your music files using the app.
button.
12
button.
button), the mute (
button then choose "Stop playing MP3
. Then speak
) function will be
. button. The
Need help?
Do you have a question about the IVM-200 and is the answer not in the manual?
Questions and answers