Table of Contents
Advertisement
1MRK 504 160-UEN -
Transformer protection RET650 2.1 IEC
Commissioning manual
IEC13000060 V1 EN
Figure 7:
Select the TCP/IPv4 protocol and open Properties
5.
Select Use the following IP address and define IP address and Subnet mask if
the front port is used and if the IP address is not set to be obtained automatically
by the IED, see
Figure
chosen for the IED.
IEC13000060-1-en.vsd
8. The IP address must be different from the IP address
Section 4
Starting up
33
Advertisement
Table of Contents
