Programming Channel Memory; To Preset Channels (Asm); To Preset Channels/To Skip Unnecessary Position Numbers; Asm (Automatic Search Memory) - Toshiba 29VZ6DE, Service Manual

• First, use the ASM (Automatic Search Memory) function to preset all the active channels in your
area automatically.
Then, arrange the preset channels with the MANUAL SEARCH , MFT (Manual Fine Tuning)
and SKIP functions so that you can tune into only desired channels.

To preset channels (ASM)

ASM (Automatic Search Memory)

Select the head of the position number to start the
1
ASM with the CH 9/8 buttons or the direct select
buttons.
2
Press the MENU button and press the MENU
buttons to call up the SET UP menu on the screen.
3
Confirm that "COLOR" is set to "AUTO" and "SOUND"
is set to proper system.
If not, press the MENU t/s buttons to move the cursor
(-) to "COLOR" or "SOUND" and press the MENU
+
/ buttons to select each proper system.
4
Select the TUNING menu page, and move the cursor
(-) to "ASM".
+
5 Press the MENU button to start the ASM. All active
channels will be preset automatically.
When presetting is complete, the initial position number
will reappear.
After presetting
Check the preset channels by pressing the CH 9/8 buttons.
• If the picture or sound of a certain channel is not good, re-
tune the channel using the ASM or MANUAL SEARCH or
MFT function.
• If the color of a certain channel is abnormal, automatic color
system selection (AUTO) may malfunction, or sound system
selection is wrong. In such a case, select another color
and/or sound system.

PROGRAMMING CHANNEL MEMORY

– +
/
–
To preset channels (Manual search) and
to skip unnecessary position numbers
Manual search
1 Select a desired position number with the CH 9/8
or direct select buttons.
Press the MENU button and press the MENU
2
buttons to call up the TUNING menu on the screen.
3
Press the MENU t/s buttons to move the cursor
(-) to "SEARCH".
–
4
Press the MENU
–
The MENU button searches for lower-numbered
channels; the MENU
channels.
Repeat this process until you can get the desired channel.
5 When the desired channel is shown, press the MENU
t/s buttons to move the cursor (-) to "MEMORY".
+
6 Press the MENU
current postion.
7
When you desire to store another channel at another
position, move the cursor (-) to "POSITION" with the
MENU t/s buttons and select a desired position
number with the MENU
Then, press the MENU t/s buttons to move the
cursor (-) to "SEARCH" and repeat the steps 4 to
7, or repeat the steps 1 to 7 after display
disappears.
– 16 –
+
/ buttons to start searching.
+
button for higher-numbered
button to store the channel at the
– +
/ buttons.
– +
/