Table of Contents
Advertisement
• For easy Channel selection, the chosen Position should have the same number as Channel stored there. For this
operation, you may use the "SEARCH" and "SKIP" functions.
Example : Presetting Channel 12 to Position 12
Channel Prese
t
Auto search memory (ASM)
All the channels that can be received are preset
automatically.
1
Select the starting position for ASM. Press (0~9) or CH
s/t.
2
Set the correct broadcast system for your region. Press
MENU and ; –/+ to call up the "SET UP" menu D7 .
Set "COLOR" to "AUTO" and set "SOUND" using CHs/
t and ; –/+.
3
Press MENU and ; –/+ to call up the "TUNING" menu
D8 . Select "ASM", then press ; + to start the search.
When the TV screen returns to the start position, the
procedure is complete.
PROGRAMMING CHANNEL MEMORY
– 15 –
Manual Search and Changing the assigned
position
Manual Search
1
Select Position 12.
Press CH s/t repeatedly until 12 is displayed. Or, press
-/-- twice to display "--" on the screen then press the "1"
and "2" buttons in this order.
2
Press MENU and ; –/+ to call up the "TUNING" menu
D8 . Press CH s/t and select "SEARCH".
Press ; –/+ to search. Pressing "-" searches for chan-
nels at lower frequencies while pressing "+" searches
for channels at higher frequencies.
3
When Channel 12 is found, press CH s/t to select
"MEMORY". Press "+" to complete the presetting.
Store Position
1
Select Channel 12.
Press (0~9) or CH s/t to find the position preset for
Channel 12.
2
When Channel 12 is selected, press MENU and
; –/+ to call up the "TUNING" menu D8 . Press CH
s/t and select "POSITION". Press ; –/+ and set "PO-
SITION" to P012. Pressing "-" and "+" respectively de-
creases and increases the position number.
3
When Position 12 is found, press CH s/t to select
"MEMORY". Press "+" to complete the presetting.
Advertisement
Table of Contents
