FeinTech FeinBeam TxRx Instruction Manual page 29

mode.
» Connect device B with FeinBeam TxRx. After successful connection, power off FeinBeam TxRx.
Switch on the Bluetooth function of device A and power on FeinBeam TxRx. Within 30 seconds the
FeinBeam TxRx and the two mobile phones will connect automatically.
Tips for pairing
» If a device has been successfully paired for the first time, the pairing information will be stored.
Therefore pairing will be quick the next time. There is no need to activate the pairing mode again.
» However, if FeinBeam TxRx did not connect with the Bluetooth headset or speaker within 1 minute,
please try to clear up the pairing list of the FeinBeam TxRx. If the Bluetooth headset or speaker
has connected with FeinBeam TxRx before, please retry pairing after cleaning up the stored pairing
list.
Battery information
Your device is powered by a rechargeable battery. The full performance of a new battery is achieved
only after two of three complete charge and discharge cycles. The battery can be charged and
discharged hundreds of times, but it will eventually wear out. Do not leave a fully charged battery
29