Advertisement
Available languages
Available languages
7. LED indicator in transmitter mode :
Power on
Pairing
Unconnected standby mode
Connected standby mode
Low voltage
Charging
Fully charged
FeinBeam TxRx working as a Bluetooth receiver
When in power off state, switch the button to RX, then long press MFB button to turn it on. All the
paired devices record will be cleared. Please don't switch between TX or RX mode immediately. Wait
3 seconds after the unit is turned off if you want to change mode. Because the unit may still have
power for 3 seconds, it may stay into the previous mode.
If the FeinBeam TxRx is working as Bluetooth Receiver it can store 8 paired device records. If you
add a ninth device, the latest pairing record will be overwritten.
Blue LED flashes twice quickly
Blue LED flashes quickly
Blue LED flashes once every second
Solid Blue LED
Red LED flashes quickly
Solid Red
Red LED turns off
23
Advertisement
