FeinTech FeinBeam TxRx Instruction Manual page 28

Power on the device A again and wait until automatic search has ended, usually 20 seconds. Only
then power on the FeinBeam TxRx. It will search and connect with device A and B automatically, the
pairing will take about 30 seconds. Then connect the audio cable to the audio source to check if
the two devices could play simultaneously. If not, please power off FeinBeam TxRx, wait 3 seconds
and switch on FeinBeam TxRx again to connect with device A and B. If retrying does not work, please
rework the steps above.
Note: There could be different Bluetooth chipsets with different functions incorporated into your
devices. So some Bluetooth speakers or headsets might not support Dual-Link. When one of the de-
vices has no sound or discontinuous playing, please retry to pair the two devices again. In Dual-Link
mode the sound quality will be standard SBC codec. Advanced aptX® codec is not possible.
Multipoint connection to 2 audio devices / phones in Receiver mode
FeinBeam TxRx can connect with two mobile phones simultaneously, but can not play music from 2
mobile phones at the same time. You could choose any mobile phone to play music, but the other
mobile phone needs to pause or end music playback.
» Connect device A with FeinBeam TxRx as described before. After successful connection, switch
off the Bluetooth function of the device A. Double click MFB of FeinBeam TxRx to go into pairing
28