Advertisement
Available languages
Available languages
Preparation before using
Before using please full charge FeinBeam TxRx and the connection device like mobile phone, tablet
computer or Bluetooth headphones.
Operation
FeinBeam TxRx charging: Please fully charge the FeinBeam TxRx transceiver before first use.
Please also charge it when a low battery is indicated: When the device is in working mode, the RED
LED flashes three times continuously (not include Red LED flashes once for successfully connec-
tion). This means the unit is working in low voltage, please charge the FeinBeam TxRx.
» Please connect the charging cable to a power adapter (USB output port) or computer
» Then connect the charging cable with its Micro USB port to the FeinBeam TxRx.
» In charging mode the red LED stays on. It goes out when fully charged.
» The entire charging takes around 2 hours time.
Bluetooth transmitter function - TX mode
You can change between Transmitter and Receiver function through the Slide option button. When
the unit is in off state, please slide the button to "TX" side, then press MFB to power on the unit.
20
Advertisement
