Advertisement
Available languages
Available languages
3. Pairing mode :
Power on the unit and double click the MFB. The Blue LED flashes quickly to enter pairing mode. It
will be in connective standby mode if no connections occur within 2 minutes.
4. Clear up the pairing list :
Power off the device and wait 3 seconds. Then switch to the other working mode (TX or RX). If
powered on again, the pairing information for the former mode will be cleared up.
5. Connect with all the connected device:
Power on the unit and short press the MFB to connect to the two latest paired devices automati-
cally. If successfully connected, the LED light is solid blue. If FeinBeam TxRx could not connect with
any device in 22 seconds (depending on the number of stored pairing devices), it will enter into
pairing mode. When used as Bluetooth transmitter, it support two connected devices for simultane-
ous audio transfer.
6. Power off automatically
The FeinBeam TxRx will power off automatically when the battery voltage gets lower than 3.1 V.
22
Advertisement
