FeinTech FeinBeam TxRx Instruction Manual page 24

1. Power on:
In off state, long press MFB for about 3 seconds. After Blue LED flashes twice, FeinBeam TxRx is pow-
ered on. (If FeinBeam TxRx did not connect with any device, it will enter pairing mode automatically).
2. Power off
In on state, long press MFB for 3 seconds. Red LED flashes twice ( if you release to early, Red LED
may only flashes once), FeinBeam TxRx is powered off. Please don't power on the unit immediately
within 3 seconds after powering off, because the voltage of the chipset may not disappeared totally.
3. Pairing mode:
Power on the unit, double click the MFB. Blue & Red LED will flash alternately and the unit has
entered pairing mode. It will power off automatically if no connection is made within 6 minutes.
4. Play /pause :
While music is playing, short press MFB to pause. Press again to play continually.
5. Clear up the pairing list :
Power off with the current working mode and wait 3 seconds. Then change to the other working
mode and power on. The pairing information for the former mode will be cleared up
6. Connect with paired devices:
Power on the FeinBeam TxRx and it will tries to connect to two paired devices automatically. Priority
24