FeinTech FeinBeam TxRx Instruction Manual page 27

If you get no sound, please check the settings on the TV: Is the TV volume set loud enough? Is the
cable properly connected? Have you selected the correct audio output (headphones)? When the
connection is successful and the volume of headset or speaker is big enough, you may hear a short
tone. This means FeinBeam TxRx and Bluetooth speaker or headphone and cables are okay. The
problem may be on the audio source.
Note: Passcodes for Bluetooth headsets or speaker etc. are "0000", "1234", "1111", "8888"
FeinBeam TxRx and Bluetooth headset or speaker that support A2DP work on other audio devices
which support headset profile. FeinBeam TxRx and Bluetooth headset or speaker could replace
wired earphones.
Dual-Link as transmitter (connection with 2 devices simultaneously)
This unit could connect with 2 stereo Bluetooth speakers or headsets to play music simultaneously.
» Select the TX mode for the device FeinBeam TxRx
» Follow the above pairing steps to connect device A and FeinBeam TxRx
» After successful connection, power off the device A. Now start pairing the device B with FeinBeam
TxRx following the same steps.
» After successful connection with device B power off FeinBeam TxRx.
27