Samsung SNH-V6410PN User Manual page 10

If you are installing on a wood wall, leave 3mm of
4.
space between the wall's surface and the mark on the
screw hole when fixing the screw.
Hang the bracket using the screw and lower it to the direction in which you
5.
intend to install.
<When installing it in the
normal direction>
Turn the screw to fix the bracket
6.
additionally.
For a concrete wall, drill holes into the wall that
7.
are 3cm deep using a drill bit with a diameter
of 5mm and a drill for concrete.
Remove any debris from the hole.
Take care when drilling the hole to avoid injury.
`
J
Insert anchors in 2 holes for screws and tap
8.
the end of the anchor slightly with a hammer
or rubber mallet to insert it completely.
10 · English
<When installing it by turning
it upside down>
Leave 3mm of space between the wall's surface and
9.
the mark on the screw hole when fixing the screw.
Hang the bracket using the screw and lower it to the direction in which you
10.
intend to install.
<When installing it in the
normal direction>
Turn the screw to fix the bracket
11.
additionally.
Place the camera on the bracket
12.
and turn the bracket lever clockwise to fix
the camera to the bracket.
Connect the adapter plug to the power
13.
terminal.
<When installing it by turning
it upside down>