Advertisement
Quick Links
John Lewis
Single
Thank you for purchasing this Woodstock Guest Bed. Please read the instructions carefully before use to
ensure safe and satisfactory operation of this product.
PRE-ASSEMBLY PREPARATION
Please ensure instructions are read in full before attempting to assemble this product
Please check the pack contents before attempting to assemble this product. A full checklist of components
is given in this lea et. If any components are missing, please contact the John Lewis Helpline.
Heavy
This product is
WHEN LIFTING
This product takes approximately
The fittings pack contains
CHILDREN
.
Read this leaflet in full before commencing assembly.
If you require any additional information or have any issues with this product plase call the John Lewis
Helpline on 01244 689949 or e-mail mail@fwgroup-uk.com
Woodstock Guest Bed
, it should be assembled as near as possible to the point of use.
to avoid personal injury and (or) damage to the product.
40 MINUTES
SMALL PARTS
to assemble with
KEPT AWAY FROM YOUNG
which should be
Stock number: 800 / 65503
For product support or spare parts please call
the John Lewis Helpline;
TAKE CARE
2 PEOPLE
.
T: 01244 689949
E: mail@fwgroup-uk.com
Advertisement
Related Manuals for John Lewis 800/65503
Summary of Contents for John Lewis 800/65503
- Page 1 The fittings pack contains which should be CHILDREN Read this leaflet in full before commencing assembly. If you require any additional information or have any issues with this product plase call the John Lewis Helpline on 01244 689949 or e-mail mail@fwgroup-uk.com...
- Page 2 Fitting and parts checklist Parts Headboard x1 Footboard x1 Side Rails x2 Slats x1 M8 x 22mm Bolt x8 M4 x 3mm Screw x8 Allen Key x1...
- Page 3 Step by step assembly instructions Step One Fix the Siderails (3) to the Headboard (1) and Footboard (2) using Bolts (A) as shown in the diagram below. Tighten using Allen Key (C). Repeat for all 4 corners. Step Two Lower the Slats (4) onto the Siderails (3) and secure using Screw (B) as shown in the below diagram.
- Page 4 Underbed Assembly Instructions...
- Page 5 Fittings and Parts Checklist - Underbed Head Panel x2 Leg Cross Rail x2 Siderails with Legs x2 Slats x1 M6 x 80mm Bolt x4 M6 x 60mm Bolt x8 M6 x 13mm Barrel Nut x12 4 x 35mm Screw x8 10 x 40mm Dowel x12 30 x 50mm Castor Wheel x4 4 x 15mm Screw x8...
- Page 6 Step One Attach the Castor Wheels (F) to the Siderails with the legs (3). Secure by using Screw (G) as shown below. Caution: Please do not place the truckle upon its side as it features a spring mechanism that could cause potential injury.
- Page 7 Step Two Insert the Dowel (E) into the holes indicated on the legs of the Siderails (3). Attach the Legs Cross Rail (2) to the legs by using Barrel Nut (C) and Bolts (A). Tighten them by using Allen key (H). Repeat this process on both sides of the Legs Cross Rail (2) as shown in the diagram below.
- Page 8 Step Three Insert Dowel (E) into the holes on the Siderail (3). Attach the Head Panel (1) onto the Siderail (3) using Bolts (B) and Barrel Nut (C). Tighten using Allen Key (H). Repeat this process for each side of the Head Panels (1) as shown in the diagram below.
- Page 9 Step Four Starting at the head end, attach the Slats (4) using Screws (D). Please ensure that the rst Slat (4) is placed as close as possible to the Head Panel (1) before securing into place. Next, pull the Slats (4) down to the footend. Ensuring the Slats (4) are covering the full length of the bed, secure using Screws (D).
-
Page 10: Care And Maintenance
It is recommended that before moving heavy objects to a new location they are completely dis-assembled If you require any additional information or have any issues with this product please call the John Lewis Helpline on 01244 689949 or e-mail mail@fwgroup-uk.com.