Tilt And Swivel Base; Label; Product Dimension/Weight (Refer To Philips Approved Sht 191); Transportation - Philips 190V1SB/93 Service Manual

更多难得资料请到江南家电维修论坛免费下载！
http://bbs.520101.com

5.12 Tilt and swivel base

• : -5 ° +2/- 0 ° (forward)
Tilt angle
+20 °+0/- 2 ° (backward)
•
Tilt for left and right:
︱A-B︱≤4.0mm
•
Black side and cut side：
L
•
Gap between bezel and rear cover
•
Step between bezel and rear cover
•
"Wobble", "Twist", etc (front to back or side to side)
Whole monitor set shall retain stability within a short time after the applied external force disappears.
20NT , 6secs（Max.） back to stable.
5.13 Kensington Lock
•
Must meet Kensington_slot.spec "TYE-M0004".

5.14 Label

•
Carton label should follow Philips requirement.
•
Regulatory label follow Philips requirement
•
China RoHS label
•
Detail document refer to Philips Engineering Reference Book
5.15 Product dimension / Weight (Refer to Philips approved SHT 191/SHT560)
•
Unit dimension
•
Packed unit dimension:
•
Net weight
•
Gross weight

5.16 Transportation

Transportation standards refer to TPV standard
5.16.1 Transportation packages
Packaging and wrapping shall be sufficient to protect the product against damage or loss during shipment from
the supplier to the destination specified in the purchase order. All packaging materials are subject to test and
evaluation per TPV standard. The cushion material shall be constructed using EPS material.
U
R
D
0.4 mm (Typ.)
Left, right and top: ≤0.6mm
: 439(w)*363(H)*191(D)
: 490(w)*375(D)*145(H)
: 3.98Kg
: 4.95Kg.
A
1. Visual area
H：｜L-R｜≤1.5mm
V：｜U-D｜≤1.5mm
2. Black side on the left and right is
symmetrical, not cut side.
Bottom and corner: ≤1.1mm
73 Meridian 1
B