Table of Contents
Advertisement
SDR-H200P / SDR-H200PC
To exit the Service Menu
Unplug the AC Cord.
5.3.
About Default Setting
The data of Menu, Mode, Card and EEPROM setting, etc. is set to the default condition in factory.
5.3.1.
How to set the Default Setting
1. Turn the Power on and set the Mode Dial to [VIDEO RECORDING MODE].
2. When pressing [DELETE], [JOYSTICK CONTROL RIGHT] and [DVD COPY] for more than 3 minutes simultaneously (with no
SD Card inserted), the items below are set to the Default Setting.
1. Menu, Mode, Adjusted Value
2. Card format
3. Reset of picture files and directory number (Set the picture record file number to 1)
4. Clear the information of Mechanism Lock
5. Set the time setting to no-setting
Fig. 2-6
18
Advertisement
Table of Contents
