Table of Contents
Advertisement
7.3.
Disassembly Procedures
Flow-Chart for Disassembly Procedure
No.
Item/Part
Fig.
1
Rear Case Unit Fig. D2
2
Operation Unit
Fig. D3
3
Front/ Top Case
Fig. D4
Unit
Fig. D5
4
Side
R/
LCD
Fig. D6
Unit
5
Lens Unit
Fig. D7
6
Main/Camera
Fig. D8
P.C.B.
Fig. D9
7
Front P.C.B.
Fig. D10
8
Open
Switch/
Fig. D11
Side R P.C.B.
9
LCD B/L P.C.B. Fig. D12
Fig. D13
Removal
(Screw,Connector,Flex. &
Other)
Open the LCD Unit and Jack
Cover.
7-Screws (A)
1-Connector FP11
Rear Case Unit
2-Screws (B)
4-Tabs
1-Connector FP61
Operation Unit
4-Hooks
1-Connector P2502
Head Disk Drive, HDD
Cushion, Top Case
3-Screws (C)1-Connector B21
HDD Relay P.C.B.
3-Screws (D), 2-Screw (E)
1-Tab
2-Connectors FP63,FP6501
Front/ Top Case Unit
2-Screws (F)
2-Connectors FP62,FP81
Side R/ LCD Unit
2-Screws (G)
2-Connectors FP31,FP71
Lens Unit
1-Screw (H)
Bottom Angle Unit
2-Screws (I)
Main Shield Plate A
1-Connector B53
Camera P.C.B.
2-Screws (J)
Main P.C.B.
4-Screws (K)
Front Earth Angle, Front
P.C.B.
2-Screws (L)
Speaker Fixing Angle
1-Connector P6301
Speaker
5-Screws (M)
Open Switch P.C.B., Side R
P.C.B.
Note:
When fixing the Open SW
P.C.B. and Side R P.C.B.,
open the LCD Unit and SD
Cover. If you fix them without
opening, both the Open SW
(SW8301) and SD Det. SW
(SW6305) will be damaged.
Turn the LCD Case to the
arrow direction so that the
screws can be seen, and
remove the 2 screws (N).
6-Tabs
LCD Case (Upper)
1-Connector FP8101
LCD Case (Lower) Unit
1-Connector FP8102
1-Screw (O)
3-Tabs
LCD B/L P.C.B.
27
SDR-H200P / SDR-H200PC
Advertisement
Table of Contents
