Table of Contents
Advertisement
5 Service Mode
5.1.
Error Display
"PUSH THE RESET SWITCH" is displayed automatically on the LCD Monitor when an undesirable condition has occurred.
Note:
When "PUSH THE RESET SWITCH" is displayed repeatedly, service is required. Check the Error Code which is listed in the
Service Menu.
5.2.
Service Menu
When abnormal detection contents are confirmed, do the following operation. Automatic diagnosis code will bedisplayed. (Service
Menu)
To enter the Service Menu
Push the [DELETE], [JOYSTICK CONTROL LEFT] and [DVD COPY] simultaneously for 3 seconds (with no SD Card inserted).
Note:
If a SD Card is inserted, the above operation will not work.
Fig. 1
Fig. 2-1
13
SDR-H200P / SDR-H200PC
Advertisement
Table of Contents
