Nav Strip - QSC TouchMix-30 Pro User Manual

Nav Strip

Nav Strip
The examples shown are
NOTE!:
from the TouchMix-30 Pro.
TouchMix-8 and TouchMix-16 will
differ slightly.
The Nav Strip provides the primary means of navigating
between fader banks. In addition, it provides an overview of all
fader positions for the selected mix and any clipping conditions.
To access the Nav Strip – From any screen, press Home once or twice to display Home page.
Blue Nav Strip Bank – Indicates the currently selected bank. Touch the bank to select it.
Nav Strip Titles – Indicates the type and range of the channels.
Faders – The faders represent the current position of all the mixer's faders for the currently selected mix (Main, Auxes 1 - 14).Fader levels are not
adjustable from the Nav Strip
Red Fader Slot – This is a "sticky" clipping indication the channel is, or has been clipping. Reduce the input channel trim, then go to Menu >
Mixer Setup > Clear Clip, or push the Clear Clip user button.
Inputs 1–8, 9–16, and 17–24 – Displays the fader settings for mic/line inputs.
Stereo In/2-Track – Displays the fader settings for line inputs and for 2-track playback and record.
FX Masters – Displays the level of the returns for the internal effects processors.
Aux Outputs 1–8, 9–14 – Displays the level of the auxiliary outputs.
Sub Nroups 1–8 – Displays the level of the eight Sub Groups (TouchMix-30 Pro only).
DCA Nroups – Displays the level of the eight DCA master faders. Refer to the DCA Group Assignments topic.
DCA Nroups – Displays the level of the eight DCA master faders. Refer to the
1001108-01-C
Inputs 1-8 Inputs 9-16 Inputs 17-24 Stereo In/2-Trk
DCA Group Assignments on page 105
39
Home
FX Masters Aux Out 1-8 Aux Out 9-14 Sub Groups
Home
(if needed)
DCA Groups