Custom Setup; Enter Custom Setup Mode; Set The Options - Welch Allyn 5102 Service Manual

Custom setup

You can customize the scale to best suit your needs. Configurations that can be selected include the automatic
shut-off time, weighing units (if available), weight resolution, and more.

Enter custom setup mode

1. Make sure the scale is powered down.
2. Press and hold ST while pressing ON.
3. Once the scale powers up, press and release ST five times. The scale displays SEt-UP and produces a series
of four long beeps.
4. The "RE CALL" pushbutton is used to select the particular option value.
5. Once this value is selected the scale can be advanced to the next option by again pressing the "ST"
pushbutton or it can be shut-off by pressing and holding the "ON" pushbutton.

Set the options

Enter the custom setup as described.
Press ST to scroll through the custom setup options.
The options displayed with each press are as follows:
Press the setup mode select button to turn these options On or OFF.
Note Options indicated with an asterisk (*) require an additional press of ST to change the value.
Option displayed Feature
SOFt This option displays the software version of your scale.
dAtE This option displays the release date of the software. The format is MM/DD/YY.
SCALE This option displays the model number of the scale.
AutOFF* This displays the number of seconds before the scale turns off. The
scale from turning off automatically.
AC con* This option causes the scale to remain on when plugged in to AC power.
rES This option allows you to change the resolution of weight. Pressing
following options:
0.1 pounds / 0.05 kilograms
0.1 pounds / 0.1 kilograms
0.2 pounds / 0.1 kilograms
0.5 pounds / 0.2 kilograms
1 pound / 0.5 kilograms
Cont
ST
switches between the
4
value prevents the