Advertisement
Quick Links
Please dispose of packaging for the product in a responsible
manner. It is suitable
environment, take the packaging to the local amenity tip
and place into the appropriate recycling bin.
Never dispose of electrical equipment or batteries in with
your domestic waste. If your supplier offers a disposal facili-
ty please use it or alternatively use a recognised re-cycling
agent. This will allow the recycling of raw materials and help
protect the environment.
FOR HELP OR ADVISE ON THIS PRODUCT PLEASE CONTACT YOUR DISTRIBUTOR,
OR SIP DIRECTLY ON:
TEL: 01509500400
EMAIL: sales@sip-group.com or technical@sip-group.com
www.sip-group.com
Ref:130912
for recycling.
Help to protect the
24
Multi P185
TIG/ARC/Plasma Inverter
05279
Please read and fully understand the instructions in
this manual before operation. Keep this manual
1
Advertisement
Related Manuals for SIP Multi P185
Summary of Contents for SIP Multi P185
- Page 1 This will allow the recycling of raw materials and help protect the environment. FOR HELP OR ADVISE ON THIS PRODUCT PLEASE CONTACT YOUR DISTRIBUTOR, OR SIP DIRECTLY ON: 05279 TEL: 01509500400 EMAIL: sales@sip-group.com or technical@sip-group.com Please read and fully understand the instructions in www.sip-group.com...
- Page 2 NOTES...
- Page 3 CONTENTS GUARANTEE Guarantee: This plasma cutter is covered by a 24 month parts and labour warranty covering Page No. Description failure due to manufacturers defects. This does not cover consumable items or failure due to misuse or operating the machine outside the scope of this manual. Contents Safety In the unlikely event of warranty claims, contact your distributor as soon as possible.
- Page 4 SAFETY OPERATING INSTRUCTIONS PLASMA INTRODUCTION: Under no circumstances must the plasma nozzle be removed or any other work be WE LEARN BY EXPERIENCE Learning safety through personal experience, like a child carried out on the torch with the machine switched on. Ignoring this precaution touching a hot stove is harmful.
- Page 5 The electric welding arc must not be observed with the naked eye. Always use a welding mask or hand shield, ensure the mask/shield is fitted with correct shade of DESCRIPTION SIP CODE filter for the welding current level. TORCH COMPLETE 05130 The electric plasma arc must not be observed with the naked eye.
- Page 6 SAFETY….cont OPERATING INSTRUCTIONS PLASMA VENTILATION: INTRODUCTION: Plasma mode Ventilation must be adequate to remove the smoke and fumes during cutting. See WE LEARN BY EXPERIENCE Learning safety through personal experience, like a child the relevant safety standard for acceptable levels. touching a hot stove is harmful.
- Page 7 OPERATING INSTRUCTIONS TIG SAFETY….cont TIG torch assembly FIRE AND EXPLOSION PREVENTION 1.Select the tungsten electrode to match current level to be welded at. 1.Causes of fire, and explosion are: combustibles reached by the arc, flame, flying 2.Grind the end of the electrode to a point of 15-20 degrees use a fine grinding sparks, hot slag or heated material, misuse of compressed gases and cylinders, wheel and grind along the axis of the electrode.
- Page 8 SAFETY….cont OPERATING INSTRUCTIONS TIG TIG mode HOSE 1.Use ferrules or clamps designed for the hose (not ordinary wire or other substitute) as You will need the following extra items binding to connect hoses to fittings. a.Regulator 2.No copper tubing splices, use only standard brass fittings to splice hose. b.Bottle of Argon Gas.
- Page 9 OPERATING INSTRUCTIONS ARC SAFETY….cont Current setting for ARC welding wearing an air supplied respirator. 5.Gas leaks in a confined space, should be avoided. Leaking gas in large quantities These settings are for E6013 electrodes, for other types of electrode consult the tech- can change oxygen concentration dangerously.
- Page 10 INTRODUCTION INSTALLATION….cont The Weldmate Mutli P185 is made with advanced inverter technology. Assembly The inverter works by converting the mains supply at 50Hz to a high frequency voltage at 100KHz, this voltage is then controlled by a PWM system before passing to the transform- 1.Remove all parts from box.
- Page 11 INSTALLATION INTRODUCTION….cont By using inverter technology the weight and volume of product can be reduced, Contents while the efficiency is raised to 85%, this give a machine that is compact, very porta- ble, controllable and energy efficient. 1 * Inverter based power unit 1 * Length braided air hose 1 * Cutting torch 2 * Hose clip...
- Page 12 INTRODUCTION….cont INTRODUCTION….cont TECHNICAL SPECIFICATIONS TIG Welding is similar in principle to MMA. An arc is created between the electrode which is made from a very durable material called Tungsten and the work piece, Model 05279 causing a portion of the metal work piece to melt forming a molten pool of metal, the area is shielded by argon gas.
Need help?
Do you have a question about the Multi P185 and is the answer not in the manual?
Questions and answers