11.2 Hydraulic resistance
Fig. 66 Pressure drop on the heating water side
[x]
Flow rate ( m³/h)
[y]
Pressure drop on the heating water side (mbar)
11.3 MC10 connection diagram
NOTICE: System damage through incorrect installation!
▶ Provide a permanent power supply (not a safety
plug).
▶ Ensure the power is connected to the correct phases.
▶ Implement the installation, fuse protection, mains
isolator, emergency stop switch and protective
measures in accordance with local regulations.
DANGER: Risk to life from electric shock!
▶ Never use the earth conductor (green/yellow) as a
control cable.
NOTICE: Operating faults through power failure!
▶ When connecting external components to the MC10
control unit, ensure that the total power consumption
of these components does not exceed 5 A.
Logano plus GB402 – 6 720 804 428 (2012/09)
Appendix
11
53