Options - Electrolux ESL 7220RO User Manual

10 www.electrolux.com
the level increases. After level 6 you
go to level 0 and then start again
from level 1.
4. Press the on/off button to confirm the
setting.
6.4 The rinse aid empty
notification
When rinse aid chamber is empty, the
rinse aid indicator is turned on notifying
to refill rinse aid. If you are using multi-
tabs containing rinse aid and you are
satisfied with the drying result, you can
deactivate the notification for refilling
rinse aid. However, we recommend that
you always use rinse aid for best drying
performance.
If you use standard detergent or multi-
tablets without rinse aid, activate the
notification to keep the rinse aid refill
indicator active.
How to deactivate the rinse aid
dispenser
The appliance must be in programme
selection mode.
1. To enter the user mode, press and
hold simultaneously
until the indicators
2. Press
• The indicators
• The indicator
continues to flash.
• The end indicator indicates the
current setting: End indicator on =
the rinse aid dispenser is
activated (factory setting).

7. OPTIONS

Desired options must be
activated every time before
you start a programme.
It is not possible to activate
or deactivate options while a
programme is running.
, and start to flash.
.
,
go off.
3. Press
setting.
End indicator off = the rinse aid
dispenser is deactivated.
4. Press the on/off button to confirm the
setting.
6.5 Acoustic signals
Acoustic signals sound when a
malfunction of the appliance occurs. It is
not possible to deactivate these acoustic
signals.
There is also an acoustic signal that
sounds when the programme is
completed. By default this acoustic signal
is deactivated but it is possible to
activate it.
How to activate the acoustic
signal for the end of
programme
The appliance must be in programme
selection mode.
1. To enter the user mode, press and
hold simultaneously
and
,
2. Press
• The indicators
and
• The indicator
• The end indicator indicates the
3. Press
End indicator on = Acoustic signal on.
4. Press the on/off button to confirm the
setting.
7.1 XtraDry
Activate this option when you want to
boost the drying performance. With the
use of this option, the duration of some
programmes, water consumption and the
last rinse temperature can be affected.
to change the
until the indicators
, and
and go off.
continues to
flash.
current setting: End indicator off =
Acoustic signal off.
to change the setting.
and
,
start to flash.
,